| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 93772 | 2008-09-30 21:12:00 | computer not booting | cotutaha (12204) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 708910 | 2008-09-30 21:12:00 | My problem is i turned on my computer this morning and it freezes on the mobo logo. Ive listened out for error beeps but nothing i get the usual 1 beep, and then it gets to the mobo logo and it freeze's. I cant even get into my bios as its really fast and i dont know which button to press. Here's my specs. Mobo. LANPARTY UT nF4 SLI-D Ram. 1GB Hynix HDD. 1x 20GB Seagate and a 250GB Western Digital Sata GFX. 6600GT any help would be appreciated |
cotutaha (12204) | ||
| 708911 | 2008-09-30 21:18:00 | Unplug the hard drive(s) and CD drive(s) and see if it gets any further. With the HDDs unplugged it should go past the mobo screen straight to "DISK BOOT FAILURE - INSERT SYSTEM DISK AND PRESS ENTER" | wratterus (105) | ||
| 708912 | 2008-09-30 21:47:00 | Try the delete key to get into the BIOS. And disable the logo. So you can see what its saying |
Speedy Gonzales (78) | ||
| 708913 | 2008-09-30 21:59:00 | Hi there. My mobo does the same thing after I have overclocked... I would reccomend what Speedy Gonzales says, just try the delete key, or even press esc to try to get into the boot menu. But if worst comes to worst, depending on how technical - a - user you are, you could manually reset the bios by removing the battery for 30 seconds and bridging the bios reset pins with the bios jumper. (easier than it sounds :nerd: ). Either way I hope it works out, Good Luck :) |
HemothaN3rd (14204) | ||
| 1 | |||||