Forum Home
Press F1
 
Thread ID: 95037 2008-11-22 01:30:00 Problem with external hard drive samstae (14331) Press F1
Post ID Timestamp Content User
721900 2008-11-22 07:38:00 it just wouldn't boot the pc.................


..............The hdd I am trying to get the stuff off does not have any form of OS on it, so I am not trying to boot from it.



Make up your mind. You don't boot from an external drive anyway. Connected it would be treated as a slave and the PC will boot from the O/S drive.
pctek (84)
721901 2008-11-22 09:10:00 Are you sure its SATA?? And not IDE?? Since SATA doesnt have Slave, only Master

That could be another reason, why it went slow, when you connected it to the mobo. It was connected to another IDE device, that was jumpered the same way (slave or Master).

I know there is no slave, but when it boots it says slave and master, that may be just the mobo, the hdd is definately sata, no doubt about it
samstae (14331)
721902 2008-11-23 06:59:00 Make up your mind. You don't boot from an external drive anyway. Connected it would be treated as a slave and the PC will boot from the O/S drive.

Yah...........

So why will the drive not be seen? am I doing something wrong?
samstae (14331)
721903 2008-11-23 07:50:00 If the BIOS doesn't show the drive at all and the cables are connected properly then its dead. pctek (84)
721904 2008-11-24 05:01:00 If the BIOS doesn't show the drive at all and the cables are connected properly then its dead.

The BIOS shows it as the slave as I said in 1 of the first few posts
samstae (14331)
721905 2008-11-24 05:50:00 If you just wanna get stuff off of it try running a live linux CD and see if you can access it that way

As I said here. Often dead drives can be resurrected long enough running live linux to retrieve your stuff
gary67 (56)
721906 2008-11-25 05:56:00 As I said here. Often dead drives can be resurrected long enough running live linux to retrieve your stuff

I have the back track live CD, any chance you can coach me through how to use it to see my hard drive? As I have not used linux before...
samstae (14331)
1 2