| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 143814 | 2017-04-14 12:05:00 | Can't fit this usb 3.1 card on my motherboard? | Ninjabear (2948) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1434218 | 2017-04-14 12:05:00 | I have a Asus B250m-A motherboard but as you can see from the picture I can't seem to fit my usb 3.1 card into the slot? Did I buy the wrong card slot? The motherboard says its a PCIE slot though I circled the area where the slot and the card to the left. I know the pic is a bit blurry but I think you guys may know after seeing it tinypic.com |
Ninjabear (2948) | ||
| 1434219 | 2017-04-14 12:11:00 | Is the card a PCIe x4 card? :) If you have a spare PCIe x16 (graphics) slot, you can put it in there instead. |
pcuser42 (130) | ||
| 1434220 | 2017-04-14 12:15:00 | Is the card a PCIe x4 card? :) If you have a spare PCIe x16 (graphics) slot, you can put it in there instead. How to tell as the specs Says Expansion Slots 1 x PCIe 3.0/2.0 x16 (x16 mode, gray) 2 x PCIe 3.0/2.0 x1 |
Ninjabear (2948) | ||
| 1434221 | 2017-04-14 13:02:00 | Is there an adapter to fit a PCI Ex1? | Ninjabear (2948) | ||
| 1434222 | 2017-04-14 19:12:00 | One of these, but remember that it will restrict your speed to PCI-E X1, a quarter of the cards capability. www.trademe.co.nz |
KarameaDave (15222) | ||
| 1 | |||||