Forum Home
Press F1
 
Thread ID: 96448 2009-01-10 23:09:00 Gigabit and PCI stormdragon (6013) Press F1
Post ID Timestamp Content User
737145 2009-01-10 23:09:00 Would there be any advantage in upgrading my home server from fast ethernet (integrated in the motherboard) to gigabit via a pci card or would the pci slot make it slower?

:thanks
stormdragon (6013)
737146 2009-01-10 23:13:00 Unless everything else is gigabit, it wont make a diff. Speedy Gonzales (78)
737147 2009-01-10 23:27:00 All other computers are gigabit capable, so if there would be an advantage I'd go and buy a gigabit card and switch. stormdragon (6013)
737148 2009-01-10 23:41:00 Oh well, in that case, it should be at gigabit speed. If all and the switch are gigabit. So, should be faster, for transferring files Speedy Gonzales (78)
737149 2009-01-10 23:48:00 So you're saying that the pci bus wouldn't make to much of a difference? stormdragon (6013)
737150 2009-01-10 23:53:00 So you're saying that the pci bus wouldn't make to much of a difference?

Well it'll make a diff in speed. Since the onboard NIC isnt GB is it.

The card is. It shouldnt be slower. If it says its a GB card, it should give you GB speeds
Speedy Gonzales (78)
737151 2009-01-11 00:59:00 The pci bus is indeed slower, try pci-e...x1 or x4 SolMiester (139)
737152 2009-01-11 01:14:00 Thanks Sol that's what I expected sadly the board only has pci-e x16 and pci slots. stormdragon (6013)
737153 2009-01-11 01:27:00 Maximum speed is 1000Mbit, converted equals a maximum theoretical throughput of 125MB per second. the PCI Bus can transfer 133MB/s so this is within the limits. Of course, other factors will probably take your networks maximum speed lower than this, to about 80% of maximum or less

You can put a slower speed card (PCI-E 1x) into a PCI-E 16x slot
Agent_24 (57)
737154 2009-01-11 01:35:00 Maximum speed is 1000Mbit, converted equals a maximum theoretical throughput of 125MB per second. the PCI Bus can transfer 133MB/s so this is within the limits. Of course, other factors will probably take your networks maximum speed lower than this, to about 80% of maximum or less

You can put a slower speed card (PCI-E 1x) into a PCI-E 16x slot

How are you calculating 1/4 speed?, you are correct in that hard` disc will also use the pci bus bandwidth but i dont follow your 25% step down??
SolMiester (139)
1 2