| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 96433 | 2009-01-10 08:59:00 | random reboot | aidanmaz (7180) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 736937 | 2009-01-10 08:59:00 | what would cause a pc to reboot randomly near the end of windows GUI setup? its not the RAM or PSU or DVDROM or hdd... what else shud i check? | aidanmaz (7180) | ||
| 736938 | 2009-01-10 09:28:00 | RAM or PSU, could even be mobo..... | SolMiester (139) | ||
| 736939 | 2009-01-10 09:33:00 | RAM/PSU are brand new | aidanmaz (7180) | ||
| 736940 | 2009-01-10 09:39:00 | new RAM doesnt mean its okay, PSU okay......have you checked the RAM for compatibility with the mobo? Remove 1 stick and install the o\s with just 1 oh...thats 4000 posts! |
SolMiester (139) | ||
| 736941 | 2009-01-10 09:41:00 | lol good on u for 4k. and i only have one stick of RAM in it i hav tried both slots | aidanmaz (7180) | ||
| 736942 | 2009-01-10 09:42:00 | you sure its not part of the install process? check cable between dvdrom and mobo as well, thats got me a few times | hueybot3000 (3646) | ||
| 736943 | 2009-01-10 09:44:00 | lol good on u for 4k. and i only have one stick of RAM in it i hav tried both slots thx........hmmm....1 stick huh?...you only have mobo and cpu left. Have you tried loading BIOS defaults? next step updated BIOS, is it on-board vid? |
SolMiester (139) | ||
| 736944 | 2009-01-10 09:44:00 | hmmm the IDE cable? cud it be the bent pin that was on the secondary IDE controller that i straightened? | aidanmaz (7180) | ||
| 736945 | 2009-01-10 09:45:00 | Thats a possibilty It wouldnt help things being bent |
Speedy Gonzales (78) | ||
| 736946 | 2009-01-10 09:47:00 | if its connecting properly, shouldnt think so.....exactly what part of the process is it falling over at? | SolMiester (139) | ||
| 1 2 3 4 | |||||