| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 97128 | 2009-02-05 02:56:00 | Detection of printer on startup | user (1404) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 745133 | 2009-02-05 02:56:00 | A minor problem but annoying. Everytime the computer is rebooted, it detects the printer as new and wants to start the hardware wizard to install drivers. I let it do this once but it makes no difference next time it reboots. Windows XP OS. Any ideas? |
user (1404) | ||
| 745134 | 2009-02-05 02:59:00 | Did you pull the USB cable out (If its USB), when you installed the drivers? Then connect it then turn the power to the printer on (when it said to)? |
Speedy Gonzales (78) | ||
| 745135 | 2009-02-05 18:52:00 | The printer was installed a couple of years ago but the problem has arisen in the last few months. | user (1404) | ||
| 745136 | 2009-02-05 20:02:00 | I would unplug the USB cable then uninstall the printer. Reboot and reinstall the driver and insert the USB cable when asked during installation. This assumes it is a USB printer. |
Sweep (90) | ||
| 1 | |||||