Forum Home
Press F1
Thread ID: 98124	2009-03-12 05:03:00	DWA-110 and DWL-G122	jackyht2002 (6606)	Press F1

Post ID	Timestamp	Content	User
755749	2009-03-12 05:03:00	Hi there guys Please advise what is the differences between the Dlink DWA-110 which is now on sale on every retail store and the DWL-G122 which we can't find that anymore??? Thanks Jacky	jackyht2002 (6606)
755750	2009-03-12 05:16:00	The 2nd is discontinued which is probably why you cant find it anywhere Theyre here (www.dlink.com.au) And here (www.dlink.com.au)	Speedy Gonzales (78)
755751	2009-03-12 05:20:00	The DWA-G122 is discontinued and the DWA-110 has replaced it. I would say that the newer DWA-110 is slightly better EDIT:Speedy, you bet me to it!:p	Blam (54)
755752	2009-03-12 20:02:00	The DWA-G122 is discontinued and the DWA-110 has replaced it. I would say that the newer DWA-110 is slightly better EDIT:Speedy, you bet me to it!:p Hi Speedy and Blam In regards about this adapter, I would thought that DWA-110 will be better going forward... However I am having an adverse effect with my new DWA-110 and connect to Dlink Modem 604T Gen II What I am experienced at the moment, my adapter receiption to my current modem is around 34% max, or even at the worst time 11%. In the past, my DWL-G122 I do at least receives around the 4/5 bar of the receiption or even full receiption... My distance between my adapter is currently is 20 steps apart, however during the steps, there are walls on both side. (although i have to say, this is not the matter because the past modem hasn't any affect on me!!!) Also I current have a PDA too, even if I turn on the Wi-Fi on my PDA, it gives me a full receiption on the same place where my adapter is placing? Could you sort of advise why is it acting like that on this adapter? I am using Windows Vista Home Premium - SP1 I have also reformat the machine again to see whether any improvement on it, but no, it is the same.. On my model, it is currently on Channel 6. Thank you for your help Jacky	jackyht2002 (6606)
755753	2009-03-12 20:07:00	Click on tech support (the 2nd link I posted) Then from the menus select DWA on the left 110 on the right, then click on go The info there, should help you	Speedy Gonzales (78)
755754	2009-03-12 21:25:00	Something may be interfering with the signal such as phones etc, using the same 2.4ghz frequency Also, what does windows show the signal strength as?	Blam (54)
755755	2009-03-12 21:31:00	Click on tech support (the 2nd link I posted) Then from the menus select DWA on the left 110 on the right, then click on go The info there, should help you I have read it prior to you tell me to read on that section.... i just don't know how can big the differences in terms of the receiptions... I have heard from other people that if i change channel to 6 or above, it will work? which way should I go, shall I go up or down on the channel? as 6 is the default.	jackyht2002 (6606)
755756	2009-03-12 21:35:00	I have read it prior to you tell me to read on that section.... i just don't know how can big the differences in terms of the receiptions... I have heard from other people that if i change channel to 6 or above, it will work? which way should I go, shall I go up or down on the channel? as 6 is the default. UPnP Virtual Server Lan Clients SNMP TR069 Filters Bridge Filters Routing DMZ Parent Control Firewall RIP ADSL ATM VCC QoS Wireless Management Wireless Performance Logout Wireless Performance These are the Wireless Performance feature for the AP(Access Point) portion. Beacon interval: 200 (msec, range:1~1000,default:200) DTIM Period: 2 (range:1~25,default:2) Hidden SSID: NO Antenna transmit power: FULL Full75%50%25%6% RTS Threshold: 2347 Frag Threshold: 2346 b/g Mode: MIXED MixedB onlyB+G onlyG+ User Isolation: NOT ENABLE QoS Support: NOT ENABLE Please save and reboot the device to take effect !	jackyht2002 (6606)
755757	2009-03-12 22:09:00	Change the channel	Speedy Gonzales (78)
1