| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 98277 | 2009-03-18 12:02:00 | HDD too SLow..sound hangs too...system down....PLZ HELP | crazy4sunshine (14724) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 757539 | 2009-04-01 08:13:00 | If the previous post doesnt work get this (dlsvr04.asus.com) <- direct link Unzip it / Install it (then unzip the BIOS update). And load the BIOS update FROM the file menu / load file DONT update it through the internet. It may freeze..Once it finishes reboot, go into the BIOS set it to its defaults / then reconfigure it then save the settings. |
Speedy Gonzales (78) | ||
| 757540 | 2009-04-01 08:15:00 | Man, still not working, i formated my Flash drive, copied and pasted the File, renamed it to P5GCMX.ROM than. booted and hold down the ALT+F12. nothing heppenes. is there some more file needed to make a drive bootable? |
crazy4sunshine (14724) | ||
| 757541 | 2009-04-01 08:16:00 | its ALT+F2 | Blam (54) | ||
| 757542 | 2009-04-01 08:17:00 | ALT-F2 NOT ALT-F12 If that doesnt work your flash drive probably isnt bootable. Try the last post I posted. Remember NOT to update it from the Internet, it MAY / WILL freeze. And then it'll be dead |
Speedy Gonzales (78) | ||
| 757543 | 2009-04-01 08:26:00 | ALT-F2 NOT ALT-F12 If that doesnt work your flash drive probably isnt bootable. Try the last post I posted. Remember NOT to update it from the Internet, it MAY / WILL freeze. And then it'll be dead Just a note speedy-the flash drive doesn't need to be bootable for EzFlash doesn't work, as the PC doesn't boot from the flash drive, it just accesses it from a BIOS application |
Blam (54) | ||
| 757544 | 2009-04-01 08:34:00 | Yup I know but not all versions of EZ-flash support booting from flash drives either (actually I dont think EZ flash 1 does at all). Only floppy If his mobo supported EZ flash 2, it would have been easier, he could have done it from within the BIOS |
Speedy Gonzales (78) | ||
| 757545 | 2009-04-01 08:40:00 | Hey i tried ALT+F2 , it showed a menu, but it says cd rom not found, flopy not found, than says this line again and again. i think my bios is not bootable from flash, anyway, i installed the file u gave me , and updated from the file i downloaded than restarted, and after restarted it showed some CMOS error, i pressed F2 and load the setup deafult and continued, AND GUESS WHAT? IT WORKED MAN! MY SYSTEM NOW SHUTS DOWN NORMALLY, I AM VERY HAPPY THAT AT LEAST ONE PROBLEM SOLVED COMPLETELY, IT'S VERY HARD TO SEE A PROBLEM SOLVED INSTANTLY IN COMPUTER. |
crazy4sunshine (14724) | ||
| 757546 | 2009-04-01 08:42:00 | Now, i sent the 1 TB for replacement, they are asking what is the problem, what should i tell them? | crazy4sunshine (14724) | ||
| 757547 | 2009-04-01 08:43:00 | The default settings MAY be good enough. If you find that something isnt working (like USB2). Make sure its on hispeed in the BIOS, to get USB 2 speed. Remember to save the settings, (if you change anything). Well we told you to WAIT. NOT to send the 1 TB back...Think of anything / something |
Speedy Gonzales (78) | ||
| 757548 | 2009-04-01 08:47:00 | No man, i didn't read any post about not to send 1 TB. and why don't u wanna send? do u think speed fan was showing false error, but my system evan showed error, when i boot my systme showed 3rd slave HDD bad, backup and replace. | crazy4sunshine (14724) | ||
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 | |||||