| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 98970 | 2009-04-14 14:31:00 | Linksys WAG160N | bk T (215) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 765075 | 2009-04-14 14:31:00 | Just got myself this new ADSL router as the old router is giving intermittent faults. What should I choose for DSL Modulation? There are: T1.413, G.dmt, G.Lite, ADSL2, ADSL2+, ADSL2L, ADSL2M, and ADSL2+M. I tried to set it to ADSL2+ , it works but the download speed is not as good as the Thomson Speedtouch. I could get around 4.4 - 4.9 Mbps for the new WAG160N and the Thomson could reach 7.8 Mbps. Is there any settings to improve the speed? |
bk T (215) | ||
| 765076 | 2009-04-14 14:35:00 | try setting it to adsl2 instead of 2+ | williamF (115) | ||
| 765077 | 2009-04-14 21:19:00 | try setting it to adsl2 instead of 2+ Set it to ADSL2 produced same results. Does it mean that the Thomson speedtouch (provided by Telecoms) is a better product? :confused: |
bk T (215) | ||
| 765078 | 2009-04-15 02:14:00 | Are you on an ADSL2+/ADSL2 capable plan and your area has ADSL2/ADSL2+? | Blam (54) | ||
| 765079 | 2009-04-15 05:56:00 | Ive had mine on auto since forever, and the line speed it gets is 7.8mbit. Actual speeds are significantly less than that though, cause we're with Telecom. :p Definitley no hassles with that router though. Try running a few www.speedtest.net to auckland on both routers, average them out and see if theres a noticable difference. They may just report the line speed differently. |
wratterus (105) | ||
| 765080 | 2009-04-15 12:08:00 | RFC 2364 PPPoA DLS Modulation G.dmt I've got 8128 Down & 160 Up on standard adsl (orcon) |
Phil B (648) | ||
| 1 | |||||