| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 100234 | 2009-05-31 08:46:00 | HDD error - WARNING PAGING FAILURE - Help needed. | Mantis (3703) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 778653 | 2009-06-01 07:53:00 | Did you run chkdsk /p/r? I ran chkdsk multiple times, and it found no errors. I did not however use those extensions. I also ran the Seagate Tools which also found no errors on the drive. Cheers. M. |
Mantis (3703) | ||
| 778654 | 2009-06-01 09:09:00 | What does everyone recommend for doing an exact drive image (preferably freeware)? I want to clone my current Seagate Boot HDD to a new Western Digital HDD so I can swap them over . I am happy to do it either via a boot cd or hot image? EASEUS Disk Copy looks quite good, as does Drive Image XML . Could I use Seagate DriveWizard to clone from a Seagate to a Western Digital drive? I was hoping to plug the Western Digital into a spare Sata Port on the the motherboard as I don't have a Sata USB enclosure . Will this work, is there any speed difference doing it this way the doing it by having the new drive connected by USB? Cheers . M . |
Mantis (3703) | ||
| 778655 | 2009-06-01 09:13:00 | Seagate drive wizard will work fine, since one of the drives is Seagate:) Pretty much a rebranded Acronis:p |
Blam (54) | ||
| 778656 | 2009-06-01 09:17:00 | Hi again Blam6. I was wanting to ask when you flashed the Seagate drives you had, did everything go smoothly? What was the problems they were displaying before the flash? and did the new firmware fix them? Thanks (and sorry for the 20 questions.... :waughh: ). |
Mantis (3703) | ||
| 778657 | 2009-06-01 09:18:00 | Disable the paging file (windows key+pause / advanced then performance / settings / advanced / change / no paging file / click on set. Then OK, then apply. Then you may have to reboot. Then go back to the same place and select system managed size / click on set again, then OK, then apply. Then reboot again |
Speedy Gonzales (78) | ||
| 1 2 3 | |||||