| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 100414 | 2009-06-06 23:59:00 | Power Supply.. | Capt.Hook (5586) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 780208 | 2009-06-08 01:37:00 | Can't get to bios...would feel a heap happier if I could. could it be a problem with the hdd ? I have the jumper on pins 7+8 for master. |
Capt.Hook (5586) | ||
| 780209 | 2009-06-08 02:00:00 | Can you switch back to original HDD to prove whether it's HDD problem or PS/Motherboard? | coldot (6847) | ||
| 780210 | 2009-06-08 02:17:00 | Its very unlikely that its a hard drive, if you can't even access the BIOS.... I would recheck the connections Blam |
Blam (54) | ||
| 780211 | 2009-06-08 02:25:00 | Can't get to bios...would feel a heap happier if I could. could it be a problem with the hdd ? I have the jumper on pins 7+8 for master. So you have two hard drive because you mentioned "as well" in the post above. If they are both jumpered master then that may be your problem if both on the same IDE cable. |
Sweep (90) | ||
| 1 2 | |||||