| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 101176 | 2009-07-04 03:29:00 | Wanted: BST ATX PSU | Myth (110) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 788755 | 2009-07-04 06:46:00 | Depth is 138mm. What size do you need? I may have a few more lying around .. The PSU I have is 125mm (width) x 80mm (height) x 100mm (depth)Depth to be as close to 100mm maybe up to 120mm max. Width can be up to 148mm, height 90mm The old PSU had a detachable bracket [to suit its smaller size]which can be bought back into service |
Myth (110) | ||
| 788756 | 2009-07-04 07:01:00 | Is there any reason the system can't be pulled apart and put in a standard mATX or ATX case with a normal ATX PSU? | stormdragon (6013) | ||
| 788757 | 2009-07-04 07:03:00 | Is there any reason the system can't be pulled apart and put in a standard mATX or ATX case with a normal ATX PSU? Because he probably doesn't have one lying around, and it costs more to buy one. |
PCT Joe (15018) | ||
| 788758 | 2009-07-04 07:17:00 | Because he probably doesn't have one lying around, and it costs more to buy one. But the rest of us members are more likely to have standard ATX hardware lying around. |
stormdragon (6013) | ||
| 788759 | 2009-07-04 08:17:00 | Is there any reason the system can't be pulled apart and put in a standard mATX or ATX case with a normal ATX PSU?Primarily because this case is the only tower I have with front USB ports which is highly appreciated by the end users. But the rest of us members are more likely to have standard ATX hardware lying around.I posted in here to see if the techs that frequent here (wainuitech, pctek, wratterus etc) might have one lying around in their back rooms. If an ordinary PSU was required, I already have a couple. But this is a smaller PSU of which I have no spares |
Myth (110) | ||
| 788760 | 2009-07-04 09:02:00 | Is there any reason the system can't be pulled apart and put in a standard mATX or ATX case with a normal ATX PSU?Primarily because this case is the only tower I have with front USB ports which is highly appreciated by the end users. But the rest of us members are more likely to have standard ATX hardware lying around.I posted in here to see if the techs that frequent here (wainuitech, pctek, wratterus etc) might have one lying around in their back rooms. If an ordinary PSU was required, I already have a couple. But this is a smaller PSU of which I have no spares |
Myth (110) | ||
| 788761 | 2009-07-05 01:20:00 | just realised I might have one will go and check in about half an hour and post back here | gary67 (56) | ||
| 788762 | 2009-07-05 01:47:00 | Which measurement is for which (i.e. is it width x height x depth?) The depth here is the important measurement. If its 138mm then yes it is too big as the PSU will hit the optical drive plug The PSU I have is 125mm (width) x 80mm (height) x 100mm (depth) Mine is the exact same size it was powering a P3 I think with one HDD and One CD drive, can't find the wattage on it but I know it works and you can have it for postage if you want |
gary67 (56) | ||
| 788763 | 2009-07-05 07:04:00 | Done deal. Will PM you after tea :thumbs: | Myth (110) | ||
| 788764 | 2009-07-05 08:48:00 | I tested it and it was dead, sorry hope someone else has one for you, if not what about your local recycling centre ours always has lots of old PSU laying around some very small | gary67 (56) | ||
| 1 2 3 | |||||