| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 101478 | 2009-07-16 05:01:00 | Do you change the FSB or Dram freq? | Speedy Gonzales (78) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 792188 | 2009-07-16 05:01:00 | If you want to change it. ie: from 667 to 800 mhz?? Everything in the BIOS is on Auto. The FSB freq can be set to manual: ie: CPU ext freq FSB 200 mhz 800 266 1066 333 1333 400 1600 So, if the mobo has a 800 fsb CPU and DDR 2 800 ram, I would put the FSB freq on manual and change it to 200? Right? |
Speedy Gonzales (78) | ||
| 792189 | 2009-07-16 05:35:00 | Er......usually unless you want to overclock, you just leave it all on auto. | pctek (84) | ||
| 792190 | 2009-07-16 05:52:00 | Err if its on AUTO then why doesnt it change to 800 instead of 667? Since the mobo, CPU and ram are 800 Doesnt look like FSB does anything it stayed on 667. So changed the Dram freq to DDR2-800 which changed it to 800 |
Speedy Gonzales (78) | ||
| 792191 | 2009-07-16 09:40:00 | Speedy G have a look at this: majorgeeks.com |
zqwerty (97) | ||
| 1 | |||||