| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 101989 | 2009-08-03 22:40:00 | FTP help | kandjc (15143) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 797785 | 2009-08-03 22:40:00 | I recently set up a web page at ihug using using Filezilla. Set up went ok and I managed to transfer my first page. Yesterday and today I tried to access the page with Filezilla to add more information and I get this: Status: Resolving address of homepages.ihug.co.nz Status: Connecting to 203.109.135.90:21... Status: Connection established, waiting for welcome message... Error: Could not connect to server Status: Waiting to retry... What could be the problem - I have not altered anything in the Filezilla configuration. Many thanks. |
kandjc (15143) | ||
| 797786 | 2009-08-03 23:26:00 | Done this yet? wiki.filezilla-project.org with_Windows_Firewall Blam |
Blam (54) | ||
| 797787 | 2009-08-04 05:36:00 | Blam, looked at that help page and done the firewall exception but when I run the Filezilla Configuration test I get this: Response: 200 Using port 1311, data token 1828079175 PORT 118,92,230,180,5,31 Response: 502 Port mismatch. Tainted by router or firewall. PORT command tainted by router or firewall. Connection closed What does that mean? What I don't get is that I had no problem connecting when setting up the web page. Many thanks. |
kandjc (15143) | ||
| 797788 | 2009-08-04 05:42:00 | Have you forwarded the correct ports on your router? | Blam (54) | ||
| 797789 | 2009-08-04 06:03:00 | Blam, I have a USRobotics 9108 adsl router and under Security Tab there is Port Triggering and boxes for: Trigger Port Start, Trigger Port End. Open Port Start, Open Port End. I presume this is what you are talking about. In Filezilla configuration there is Lowest Available Port = 6000, Highest Avaialble Port = 7000. What do I do with these? Many thanks. |
kandjc (15143) | ||
| 797790 | 2009-08-04 06:20:00 | You usually need to open port 21 in the router for FTP transfers. Edited: have a read of the manual (www.usr.com) on how to open Port 21 |
wainuitech (129) | ||
| 797791 | 2009-08-04 09:03:00 | WT is dead right. If filezilla is left with default settings then 21 is the port to forward Just follow the manual, then test if the port is open with this: http://www.canyouseeme.org/ Cheers Blam |
Blam (54) | ||
| 797792 | 2009-08-04 11:08:00 | The router is not exactly the same as the manual but I can get to "Add Virtual Server" and it asks: "Select the service name and enter the server IP address and press Apply to forward IP packets for this service to the specified server" Where do I find the server IP address? Many thanks. |
kandjc (15143) | ||
| 797793 | 2009-08-04 11:35:00 | Server IP means the IP of the computer you jneed to forward the port to. If you do not have a static IP set up or Static DHCP set up then the internal IP may change everytime you boot your computer. TO find out the IP of the computer go run>ipconfig Blam |
Blam (54) | ||
| 797794 | 2009-08-05 00:41:00 | Blam, in router setup/Add Virtual Server when I add FTP server I get the following warning: "Since port 21 is used, the router FTP server port will be moved to 2121" Then when I run CanYouSeeMe.org I get this message: Error: I could not see your service on "my ip number" on port (2121) Reason: Connection timed out. Many thanks. |
kandjc (15143) | ||
| 1 2 | |||||