| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 102763 | 2009-08-31 13:20:00 | Assembling a Computer. | Mister (15201) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 805731 | 2009-08-31 13:20:00 | Hello all, again. So I ordered my computer parts, and they are due tomorow, but I am very 'scared' to attempt to put it together, as it is my first build. Is there any tips, or things I should know before assembling? I've been browsing for guides all day, but I don't think I trust them all. :thanks Oh, and if it helps, these are my parts. Aerocool Vx-9 ATX Mid Tower Case, Black Intel Core 2 Quad Q8200 2.33 GHz, 1333MHz FSB, Socket 775, Retail pack with fan, Low Power Seagate Barracuda 7200.12 ST3500418AS Hard Disk Drive, 500GB, 7200rpm, 16MB Cache, SATA-2 LG Electronics GH22NS50 DVD Writer, DVD 16R/22W/8RW, CD 48R/48W/32RW, Internal, SATA, Black, OEM OCZ Platinum Kit, 2x2GB, DDR3-1600, PC3-12800, CL7, DIMM, XTC Heat Spreader Asus M4A785TD-M EVO Motherboard, Socket AM3, 4xDIMM, DDR3, PCIe-16, 2xPCI, 1xPCIe-1, 12xUSB2, Firewire, Audio, Video, 1xATA, 6xSATA, RAID, M-ATX, DVI, HDMI Gigabyte GV-N26OC-896I Video Card, GeForce GTX 260, 896MB, DDR3, PCIe-16, DVI, SLI ready, HDMI ST Lab M-114 Sound card, 4.0, PCI Genius KB110 Keyboard, USB, Black ViewSonic VX1940w Monitor, 19" LCD, 1680x1050, DVI, Black Genius GM56PCI-LA Modem, 56K, PCI D-Link DFE-528TX Ethernet Adapter, 10/100 Mbps, PCI Cooler Master eXtreme Power Plus, 460W ATX PSU, SLI Ready, Black |
Mister (15201) | ||
| 805732 | 2009-08-31 13:36:00 | When you've assembled all the parts and are ready for first boot, don't put the case sides on just yet, first boot rarely goes trouble-free :D I remember the time 2 years ago when I was in your position: constructing a PC with brand-new parts . And would you believe it, the computer didn't start up at all . In the end, it came down to a dead motherboard, even though it was brand-new :horrified . Once you've got the PC working and the OS installed, and all the drivers downloaded and installed and your essential programs and software installed, burn an image of your system (if you have that capability) so that you can restore it all shiny and ready to go if your system crashes down the line . |
xmojo1 (4630) | ||
| 805733 | 2009-08-31 13:43:00 | Just noticed looking at your parts list, you've listed a discreet PCI network card, but doesn't your motherboard have an onboard Gigabit network adapter? I would've thought just about most current-day mobos have built-in gigabit network adapters now. Your mobo seems to have just about every other onboard connector plus the kitchen sink, so I find it unusual if there is no onboard network port. | xmojo1 (4630) | ||
| 805734 | 2009-08-31 20:28:00 | Get an anti-static wrist strap, or at least ground yourself by touching an unpainted metal part of the case. | pcuser42 (130) | ||
| 805735 | 2009-08-31 20:46:00 | Plug the computer in and turn off the power. Have a work surface by it, touching the case earths you. Put the CPU and RAM in the board before you put it in the case. READ the manuals. The CPU pamphlet shows how to do it. Then the motherboard manual shows all the connectors from the case. Line the risers for the case up with the holes in the motherboard, check it and put the backplate in then put the board in. The rest is fairly easy. When you have finished test it. If its all good, tidy up the cabling with as many cable ties as you need. Tuck them to the side, in drive bays wherever you have to - keep them away from/off the board. The idea is neatness and good airflow. Oh and don't force anything, if it doesn't go in easy then you have it the wrong way round. |
pctek (84) | ||
| 805736 | 2009-08-31 20:54:00 | Umm a socket 775 CPU Intel Core 2 Quad Q8200 2.33 GHz, 1333MHz FSB, Socket 775, Retail pack with fan, Low Power Wont fit on an AM3 mobo. Asus M4A785TD-M EVO Motherboard, Socket AM3, 4xDIMM, DDR3, PCIe-16, 2xPCI, 1xPCIe-1, 12xUSB2, Firewire, Audio, Video, 1xATA, 6xSATA, RAID, M-ATX, DVI, HDMI So, you'll have to replace the CPU or the mobo. |
Speedy Gonzales (78) | ||
| 805737 | 2009-08-31 20:56:00 | Umm a socket 775 CPU wont fit on an AM3 mobo. So, you'll have to replace the CPU or the mobo. Good spot :thumbs: |
pcuser42 (130) | ||
| 805738 | 2009-08-31 21:36:00 | Plug the computer in and turn off the power. Have a work surface by it, touching the case earths you. Put the CPU and RAM in the board before you put it in the case. Putting the CPU on the mobo can be nerve-wracking since it usually takes quite a force pressing down on the lever. Just be sure your hand does not slide off when pushing. Your CPU may already have thermal paste applied but if not, follow the instructions and do not apply too much. Re: the advice to plug in the pc - with the power turned off at the wall and on the ps - I know this is standard advice for preventing static discharges but I have never felt comfortable keeping the ps plugged into the mains. Most of NZ at this time of year and most homes are not dry enough to produce a lot of static electricity but even so I wrist strap is a good idea or at the very least be sure to touch a bare metal part of the case before you fiddle with anything else. At first power-up, check that the CPU fan is working. Anyone else think that the PS does not have enough grunt? |
Strommer (42) | ||
| 805739 | 2009-08-31 21:39:00 | So, you'll have to replace the CPU or the mobo.Ouch, well spotted there Speedy! Mister, I'd recommend you replace the motherboard rather than downgrading the CPU - AMD ones are a tad gutless at the moment, although it is of course entirely up to you... |
Erayd (23) | ||
| 805740 | 2009-08-31 21:41:00 | Just saw that myself... Asus M4A785TD-M EVO Motherboard, Socket AM3, 4xDIMM, DDR3, PCIe-16, 2xPCI, 1xPCIe-1, 12xUSB2, Firewire, Audio, Video, 1xATA, 6xSATA, RAID, M-ATX, DVI, HDMI and Intel Core 2 Quad Q8200 2.33 GHz, 1333MHz FSB, Socket 775, Retail pack with fan, Low Power Will in no way work together. You'd either want to change to a DDR3 Intel socket 775 board, or if that's too dear you'll have to get a DDR2 board and get different RAM too. Stick with Intel though. :) www.computerlounge.co.nz www.computerlounge.co.nz There are two Asus DDR3 socket 775 boards, both pretty average. I've done a few builds with this board and found it to be nice to work with, I'd pick it over any of the Asus DDR3/socket 775 boards. They both have the same warranty and are of similar quality. www.computerlounge.co.nz Also a 460w PSU for that lot is rather on the small side. I'd recommend going up to at least the 550w, those CoolerMaster PSUs aren't the best, but they are good value for money and have a decent warranty. I've used the 550w in a lot of builds and have had no issues with it at all (yet). www.computerlounge.co.nz |
wratterus (105) | ||
| 1 2 3 4 5 6 7 8 9 | |||||