| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 103526 | 2009-09-27 01:49:00 | Project: OVERCOOL | bluezone (12434) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 814344 | 2009-11-22 22:22:00 | Looks like you have taken the time to do it right and with a good result when the project is complete. | convair (13650) | ||
| 814345 | 2009-11-23 05:09:00 | Yeh lian li wheels just bolted on to the case without drilling any holes was a easy mod that part. Inside of case is going to be cover with PSU and mobo and also looking into doing sum panels inside the case to cover the 5.25" bay holes. Thanks. |
bluezone (12434) | ||
| 814346 | 2009-11-23 10:57:00 | Looking good. Have you thought of doin anything with the inside? Like paint it black? | hueybot3000 (3646) | ||
| 814347 | 2009-11-23 11:14:00 | Nop dont plan to paint inside. most of the inside is going to be covered. id with system and the 5.25" bays im going to cover with a black alloy panel. kind of like the case silver. Just looking into what PSU to get at moment. Wanting Black case and modular and under $280. |
bluezone (12434) | ||
| 814348 | 2009-11-24 08:28:00 | Right not a lot done on it tonight mostly just little bits. Got the rear fan wire hider finished and gromment into it. i713.photobucket.com Goes into here. there is a hole in the bottom left end for the fan wires to go up into the wire hider. i713.photobucket.com Also got the grommet in the mobo installed so the fan wires cat go behind the mobo tray. i713.photobucket.com Installed black thumb screws on PCI slots. i713.photobucket.com Got a coat of etc primer on the wire hider part and got my rear fan ready to install just got to get sum black heatshrink tomorrow. Also measure up the 5.25" bay side panel cover so i can get a sheet of alloy for it. |
bluezone (12434) | ||
| 814349 | 2009-11-25 09:34:00 | Ordered PSU tonight and black cable sleeving. Corsair HX620 620w psu. |
bluezone (12434) | ||
| 814350 | 2009-11-27 09:42:00 | Right got both orders today. i713.photobucket.com PSU. i713.photobucket.com All the cables for the PSU. i713.photobucket.com Arty photo. i713.photobucket.com Did sum work on the 5.25" bay side cover. Had to cut the alloy sheet down to fit and notch the little holes in the side. i713.photobucket.com Test fit is perfect. i713.photobucket.com This is what the notch's are for. To clear the rivets. i713.photobucket.com Tomorrow I plan to get the front of the case on to the case also work out a way to attach the 5.25" side bay cover. Got 1st coat of black onto the rear fan cable hider tonight also so should have that in case on monday night. |
bluezone (12434) | ||
| 814351 | 2009-12-03 09:32:00 | PSU installed. i713.photobucket.com i713.photobucket.com Cover to hide the rear fan wires. i713.photobucket.com I was black hammer hard paint on it. cool effect. i713.photobucket.com Installed. no more fan wire flying all over the show. i713.photobucket.com After thinking and looking at the case i removed 5 of the Scythe hdd coolers and now only going to have 3 as I couldnt ready install much hardware in the case. Dont think anyone has ever done this with a hdd cooler. Installed all 3 into the 4 5.25" bays under the dvd drive standing on there ends so the wires go out the bottoms of the hdds. i713.photobucket.com i713.photobucket.com Made 2 brakets to stop the hdd coolers moving and installed so soft padding on the tops on the brackets for the coolers to rest on. i713.photobucket.com Another update soon. Thanks |
bluezone (12434) | ||
| 814352 | 2009-12-03 09:57:00 | Another update. Had to sort out files. Drill the holes for the middle hdd cooler mounts. i713.photobucket.com Installed a rubber grommet in the bottom of the 5.25" bays for cables. i713.photobucket.com Got the front of the case together and onto the case. i713.photobucket.com This is how the hdd cooler will go. i713.photobucket.com The cover for the side of the 5.25" bay. Also painted with the black hammer hard paint. Love the effects. i713.photobucket.com Sum photos of the case at moment. i713.photobucket.com i713.photobucket.com i713.photobucket.com i713.photobucket.com I also throw a coat of the hammer hard paint on the front panel. i713.photobucket.com Will get sum nicer photos tomorrow after work. |
bluezone (12434) | ||
| 814353 | 2009-12-03 10:05:00 | Very nice work, wish I had your patience and skill!:thumbs: | KarameaDave (15222) | ||
| 1 2 3 4 5 6 7 | |||||