| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 103526 | 2009-09-27 01:49:00 | Project: OVERCOOL | bluezone (12434) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 814314 | 2009-10-17 20:42:00 | Nice work. Wouldn't have thought you could do the large holes with a hole cutter. Bet the gear suppliers like you:D |
linw (53) | ||
| 814315 | 2009-10-17 22:19:00 | Yeh I Had a bit of wood on the drill press then the alloy panel clamped to it wasnt going to move. Always do a pilot hole first and use cutting liquid and take you time. Yeh Im a member on the Scythe forums they really like it. :) |
bluezone (12434) | ||
| 814316 | 2009-10-19 05:12:00 | Got a 1m of 12mmx12mm U alloy today. Cut 2 bits for the front panel. Also got sum 150mmx150mm Replacement Gauze for Camping that will be used as fan filters. :) 2 sheets in each pack. The holes in this stuff are 1mm by 1mm. i713.photobucket.com This is how the front is going together. It will bolt from the sides into the case. i713.photobucket.com The fans will be in the inside of the 2 panels and fan grills on front and back of the unit. i713.photobucket.com |
bluezone (12434) | ||
| 814317 | 2009-10-23 05:20:00 | Got a package today. :) My other 4 Scythe Himuro HDD Coolers The tower of Scythe. :O 8x Scythe Himuro HDD Coolers. i713.photobucket.com long weekend so going to mod sum more of the front. |
bluezone (12434) | ||
| 814318 | 2009-10-24 04:32:00 | Spent most of day working on front panel and drive bays. Just got to get more bolts and nuts and black rivets to finish the front off. Font of the case off. Hole at the bottom is going to be were i run the front fan cables into the case. i713.photobucket.com Front of case in bits ready to drill holes. i713.photobucket.com Both U alloy bolted in place on the front rails. They will be riveted with black rivets later after black paint. i713.photobucket.com Test fit. i713.photobucket.com Test fit front panel. i713.photobucket.com Test fit 100mm fan. Bolts will be Allen key bolts later. Wires are all hiding inside the unit and will go into the bottom part where the Silverstone logo is then into the case. i713.photobucket.com i713.photobucket.com Test fit front on case. i713.photobucket.com Rubber Scythe HDD mounts installed. i713.photobucket.com More rubber mounts. Took about 20mins to install them all. i713.photobucket.com Allen key bolts on all drives. i713.photobucket.com Thats it for now till i get sum bolts and more parts. Thanks |
bluezone (12434) | ||
| 814319 | 2009-11-05 04:08:00 | Whats happening with it? | hueybot3000 (3646) | ||
| 814320 | 2009-11-05 05:37:00 | looks good, puts my project to shame :( | PCT Joe (15018) | ||
| 814321 | 2009-11-05 07:06:00 | not a lot at moment but picked up another lot of nuts, bolts, washers, Black rivets today. $62 worth. Allen key sockethead bolts and locknuts and washers, Black countersunk rivets, most of this lot is for the fron panel to bolt it together and to bolt the fans in plus bolt the rear fan in. Also bolts to upgrade the screw type bolts on the HDD coolers. i713.photobucket.com Next on the list is to get sum etch primer and black paint. |
bluezone (12434) | ||
| 814322 | 2009-11-05 08:08:00 | wow your definitely doin it properly | hueybot3000 (3646) | ||
| 814323 | 2009-11-05 09:41:00 | lol yeh im upto arount $120 on just the bolts and nuts sofar. lol. :waughh: Next week i hope to have a pack of black cable sleeving and sum other parts. :) |
bluezone (12434) | ||
| 1 2 3 4 5 6 7 | |||||