| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 103526 | 2009-09-27 01:49:00 | Project: OVERCOOL | bluezone (12434) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 814294 | 2009-09-27 01:49:00 | Hi forum readers. Just wanted to let you no about a project case build im starting. Going to be using a Silverstone KL-02 case stripped all cables and bay covers off and going to be installed 8 Scythe Himuro hdd coolers in it and Scythe fans plus CPU plus VGA cooler. Concept design I have designed up. i713.photobucket.com Im normal into modding Lian li cases but wanted a change an really like the look and design of Scythe products. Hope you like the design I will be starting a Build log for it soon. Just building up my supplys for the case build at moment. Planning to build a silent file server / graphic design pc. Parts I have so far. 1x Silverstone KL-02 case. www.silverstonetek.com To go in the rear of the case. 1x Scythe slip stream, Kaze-Jyuni, 120mmx25mm, 800rpm, 9 blade fan. www.scythe-eu.com For the front of the case infront of the Scythe HDD coolers. 3x Scythe Kaze-Jyu, slim, 100mmx12mm, 1000rpm, 13 blade fan www.scythe-eu.com Installed into the 5.25 bays. 8x Scythe Himuro Hard Disk Cooler, SCH-1000 www.scythe-eu.com Installed on the rear case fan. 2x 120mm, chrome fan grill. Installed on the fornt case fans. 6x 92mm, chrome fan grills. Also got black thumb screws for the PCI slots and PSU and case side panels. Using black allen key bolts on all the drives. 1x set of Lian li wheels for the case to replace a little media type feet on it. www.ascent.co.nz Kit of the sound proofing stuff and the rubber fan mounts. 1m of alloy angle for front of case to hold alloy sheet on. Still got to get alloy sheet. Thanks for looking. PS. Anyone no where i can get a sheet of alloy about 200 wide by 460mm high and round 1.5 to 2mm thick? In Christchurch. |
bluezone (12434) | ||
| 814295 | 2009-09-27 03:27:00 | Try Micro Wakefield for the alloy check in there scrap bin first will be cheeper than if they cut it from a full sheet. Cheers Wayne |
WayneMiddy (14028) | ||
| 814296 | 2009-09-27 04:07:00 | Thanks Wayne wil try them. :) | bluezone (12434) | ||
| 814297 | 2009-10-08 07:04:00 | Started a Project log of the build. forums.bit-tech.net |
bluezone (12434) | ||
| 814298 | 2009-10-08 07:09:00 | How much did that case set you back?? Im guessing it all ready comes with a window on the side? | convair (13650) | ||
| 814299 | 2009-10-08 08:54:00 | yeh had side window in it. cost $160, Manufacture Code : KL02B-W | bluezone (12434) | ||
| 814300 | 2009-10-08 08:57:00 | I can get you up to .9 from work, stainless, alley, think there might be galv hiding in there if u wanted a real rough look lol Looking forward to some pics |
hueybot3000 (3646) | ||
| 814301 | 2009-10-08 09:47:00 | Yeh was thinking about painting the galv black but didnt kind of like it. looks industrial. :) | bluezone (12434) | ||
| 814302 | 2009-10-08 09:55:00 | Paint it black! Black makes any case look good | hueybot3000 (3646) | ||
| 814303 | 2009-10-16 11:28:00 | Picked up my aluminum for the front of the case and a xtra bit for other parts. 3mm thick stuff. i713.photobucket.com Designed up the template for where all holes have to go on the front. Program I use is TurboCAD Pro 16. i713.photobucket.com After designing in TurboCAD to scale i save it as a EPS and opened it in Adobe Illustrator CS4 and made this up. Gives you a idea on what it will look like. i713.photobucket.com Tomorrow im going to print the template out at work on A3 as i only have a A4 printer so hope to start cutting the panel this weekend. Thanks for looking. |
bluezone (12434) | ||
| 1 2 3 4 5 6 7 | |||||