| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 105057 | 2009-11-17 07:22:00 | Tomato Firmware. Blocking Port Issues. | bob_doe_nz (92) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 831064 | 2009-11-17 07:22:00 | Got an Asus WL-520GU Router running on Tomato Firmware, half bridged to a Dynalink RTA1320. Currently I'm trying to block all but the basic ports on the router to various IP's / MAC Addresses. I've got the following ports allowed: 21,22,25,53,80,110,443,1863,5050,5222 But when I try it on a test machine, I just get timeouts on all web browsing and chat software. Below is what I've blocked, set up as a single Access Restriction List. Once I disable it, internet usage is all hunky dory TCP/UDP, port 1-20 TCP/UDP, port 26-52 TCP/UDP, port 54-79 TCP/UDP, port 81-109 TCP/UDP, port 111-442 TCP/UDP, port 444-1000 TCP/UDP, port 1001-1500 TCP/UDP, port 1501-1862 TCP/UDP, port 1864-5049 TCP/UDP, port 5051-5221 TCP/UDP, port 5223-65535 |
bob_doe_nz (92) | ||
| 831065 | 2009-11-17 07:36:00 | In Access Restriction you want: Enabled All Day Every Day Normal Access Restriction Applies to All Except Enter the MAC / IP of those that you do *not* want affected Untick Block All Internet access Specify the ports you want blocked as "Src or Dst" |
Chilling_Silence (9) | ||
| 831066 | 2009-11-17 08:01:00 | The only difference is that mine is applied to only two addresses instead of Enter the MAC / IP of those that you do *not* want affected I changed it to your settings and still get the same issues. I've included a screenie (www.imagef1.net.nz) |
bob_doe_nz (92) | ||
| 831067 | 2009-11-18 00:34:00 | Bump? Any ideas? | bob_doe_nz (92) | ||
| 1 | |||||