| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 106123 | 2009-12-27 19:25:00 | urgent help needed--after installation of watercooling.thanks | powerover (12121) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 843584 | 2009-12-28 18:58:00 | where can I get that? is there a online version? :P Not sure if this is it (forums.atomicmpc.com.au) |
plod (107) | ||
| 843585 | 2009-12-28 19:20:00 | here guys, links to the pics: www.imagef1.net.nz www.imagef1.net.nz www.imagef1.net.nz any obvious wrong doing you guys can c? thanks |
powerover (12121) | ||
| 843586 | 2009-12-28 19:27:00 | Well the CPU fan isnt connected. Did you plug it in after you pulled it to bits? | Speedy Gonzales (78) | ||
| 843587 | 2009-12-28 19:34:00 | Now there's a point. Can you get to the BIOS? if not, try pugging in the cpu fan. The motherboard may be noticing that its not there. In pic 3, the ram isn't fitted correctly and needs to be pressed home. |
Sam I Am (1679) | ||
| 843588 | 2009-12-28 19:36:00 | Well the CPU fan isnt connected. Did you plug it in after you pulled it to bits? I thought I dnt need the cpu fan anymore so I didn't plug it in...I did in the first time. |
powerover (12121) | ||
| 843589 | 2009-12-28 19:38:00 | 2 things that HAVE to be plugged in for a system to turn on. The CPU fan and the ATX 12v adapter. If one or the other isnt connected, it wont turn on. Is that what the Nvidia fan on the mobo is (its on the CPU)?? | Speedy Gonzales (78) | ||
| 843590 | 2009-12-28 19:40:00 | Now there's a point. Can you get to the BIOS? if not, try pugging in the cpu fan. The motherboard may be noticing that its not there. In pic 3, the ram isn't fitted correctly and needs to be pressed home. um...I don't know if i can get into the BIOS, there is no display comming out of my graphic card :(....and I checked the ram, they are in properly now (im pretty sure they are in properly in the pic as well).. any ideas? thanks sam |
powerover (12121) | ||
| 843591 | 2009-12-28 19:42:00 | 2 things that HAVE to be plugged in for a system to turn on. The CPU fan and the ATX 12v adapter. If one or the other isnt connected, it wont turn on pluged the fan in, and the ATX 12V connector, same story as before, everything fires up, but no display....no power comming out of all the usb ports either. :( thanks speedy. |
powerover (12121) | ||
| 843592 | 2009-12-28 19:42:00 | I thought I dnt need the cpu fan anymore so I didn't plug it in...I did in the first time. So have you tried as speedy say's and plugged it in? whups my bad. I see you have |
Sam I Am (1679) | ||
| 843593 | 2009-12-28 19:48:00 | Stupid question but is the on/off switch on the back on lol. If its got one? Try removing the CMOS jumper for about a min, (turn it off first) then put it back on. Then see what happens | Speedy Gonzales (78) | ||
| 1 2 3 4 5 | |||||