| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 108641 | 2010-04-06 00:26:00 | Cpu speed halved! | PC builder (15482) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 873406 | 2010-04-06 02:15:00 | Is this the PC? www.trademe.co.nz If so then what Ollie says is right you are trying to run an 800 Mhz fsb processor in a motherboard that only supports 533 Mhz or 400 Mhz. changing to a compatible CPU or a compatible motherboard are your options. |
KarameaDave (15222) | ||
| 873407 | 2010-04-06 02:34:00 | Nowhere does that say it's an 800Mhz FSB processor! There are, in fact, Pentium 4 CPUs which run at 2.6Ghz and have 400Mhz FSBs. There is also a CPU which runs at 2.66Ghz and has a 533Mhz FSB |
Agent_24 (57) | ||
| 873408 | 2010-04-06 02:39:00 | Nowhere does that say it's an 800Mhz FSB processor! There are, in fact, Pentium 4 CPUs which run at 2.6Ghz and have 400Mhz FSBs. There is also a CPU which runs at 2.66Ghz and has a 533Mhz FSB Sorry. That is the newer listing in the old listing it was defined as a hyperthreader so I assume a fsb of 800 Mhz www.trademe.co.nz |
KarameaDave (15222) | ||
| 873409 | 2010-04-06 02:58:00 | Ah yes, I think you are right | Agent_24 (57) | ||
| 873410 | 2010-04-06 03:00:00 | Yeah, sorry, I should have posted the original link but failed to notice the lack of mention of hyperthreading in the new listing. (wonder if it is the same PC?) |
KarameaDave (15222) | ||
| 1 2 | |||||