| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 109666 | 2010-05-18 01:13:00 | monitor difficulties | hammer (1735) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 885920 | 2010-05-18 08:42:00 | screen goes fuzzy and shuts down every fourth time it gets a blue screen with writing on but it goes too fast to read anything havent sween BSOD |
hammer (1735) | ||
| 885921 | 2010-05-18 08:47:00 | I use nVidia, not ATI -- BUT under the advanced settings, / troubleshooting/ Does it have the option to adjust ( mines grayed out) Example (www.imagef1.net.nz). What you can also look at - click start, type in reliability ( you should only get to reli) then in the search results up top, click on " view Reliability history" It takes a moment to load, but once loaded, where it crashed there should be a red circle with a X in it, select it, and look to see whats crashed, (what is it if its mentioned) there may be on the right a link to check for solutions - click that and see if anything helpful is given. no there is no option to adjust(grayed out) reliability history just says windows shut down unexpectedly nothing i can learn anything from |
hammer (1735) | ||
| 885922 | 2010-05-18 08:48:00 | Here's the same prob (en.community.dell.com) with the same monitor. | Speedy Gonzales (78) | ||
| 885923 | 2010-05-18 08:48:00 | Go to controlpanel, system, advanced and turn off auto restart. | Sweep (90) | ||
| 885924 | 2010-05-18 08:54:00 | On the link Speedy posted - a bit further down it says Open the Ati Catalyst Control Center- Digital Panel Properties- Attributes and enable "Scale image to full panel size". This fixed one persons problem - but not others. |
wainuitech (129) | ||
| 885925 | 2010-05-18 09:22:00 | Looks like that option isn't in the same place in 10.4 If you're using 10.4 of the drivers, bring up CCC / go to desktops and displays in the menu. Click on the monitor down the bottom on the left / right mouse configure | Speedy Gonzales (78) | ||
| 885926 | 2010-05-18 09:46:00 | 23# yeah same here dvi single supplied but outlet dvi dual. do you reckon i should give it a go to change it? wouldnt cost much. 24# done 25# no option for tat in my Ati CCC 26# Ah haaa! yep thanks . but it is also grayed out but the scale to full panel size is ticked below the graying. i have also gone and changed every program we have added (mostly ones from older pc's ) to compatability with xp sp3 and to be run as administrator every time . havent crashed for a while so i am now off to have a big plate of icecream with a double esspresso poured over it. yummm. while i wait for next crash ( or not). 'trying to make the hammer bigger. sic' thanks guys . really appreciate your help.. |
hammer (1735) | ||
| 885927 | 2010-05-18 09:51:00 | What version of the ATI drivers are installed? 10.4? It maybe the cable youre using why some of the options are greyed out? This is what mine looks like. Are the monitor drivers installed as well? |
Speedy Gonzales (78) | ||
| 885928 | 2010-05-18 10:02:00 | win7 video drivers | hammer (1735) | ||
| 885929 | 2010-05-18 10:06:00 | So, youre using the default Win7 video driver? If you are, install the ATI 32 bit (game.amd.com). Or 64 bit drivers (game.amd.com). Depending on which version of Win7 you've installed | Speedy Gonzales (78) | ||
| 1 2 3 4 | |||||