| Forum Home | ||||
| PC World Chat | ||||
| Thread ID: 102787 | 2009-09-01 08:27:00 | Whereabout can I get an extra hole to be punched into a strap? | Renmoo (66) | PC World Chat |
| Post ID | Timestamp | Content | User | ||
| 806064 | 2009-09-05 22:26:00 | Can sharpen the shovel handle to a point so they cant lean on them. Would have thought leaning on a point would be most uncomfortable.! |
Cicero (40) | ||
| 806065 | 2009-09-05 22:50:00 | Not as much as leaning on a blunt would be wow that would leave a bruise | gary67 (56) | ||
| 806066 | 2009-09-06 00:16:00 | why dont you make a hole by burning it thru with a small soldering iron? | prefect (6291) | ||
| 806067 | 2009-09-06 01:15:00 | Another method would be to remove the strap altogether and apply superglue to the watch. Stick watch on wrist in the desired place and make sure you get it right the first time. No more loose watch. Problem solved! :horrified |
Sweep (90) | ||
| 806068 | 2009-09-06 10:38:00 | If you want a really neat hole punched out, try Mr Minute if you have one near you in a mall somewhere - otherwise a shoe repairer. Also, I think you can buy a cheap squeeze type punch (with the rotary wheel on the end for several different hole sizes) from Bunnings or Mitre 10, for example. Good luck. |
venturemrm (15221) | ||
| 806069 | 2009-09-06 10:41:00 | this still dragging on :p | GameJunkie (72) | ||
| 806070 | 2009-09-12 12:32:00 | When I was out window-shopping this afternoon in Howick (East Auckland), I got an additional two holes punched into the strap at a watchmaker for free. So tada! That's the end of the thread. Cheers for the helpful suggestions that had come through :thumbs: |
Renmoo (66) | ||
| 806071 | 2009-09-12 12:40:00 | So the solution that worked was way back at post No4. Go figure. |
Sweep (90) | ||
| 806072 | 2009-09-12 12:41:00 | So the solution that worked was way back at post No4. Go figure. Indeed. It was a matter of which solution is within reach with the minimum effort. |
Renmoo (66) | ||
| 1 2 3 4 5 6 7 8 | |||||