| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 109765 | 2010-05-22 02:19:00 | Gskill Ram not compatible with themselves?? | powerover (12121) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 887099 | 2010-05-22 02:49:00 | Is the mobo the one in your sig?? If it is the no beeps may mean the ram is incompatible (hardforum.com) Check out the forum (vip.asus.com) |
Speedy Gonzales (78) | ||
| 887100 | 2010-05-22 02:52:00 | Hey guys I got it going....have to manually set the ram frequency to 800Mhz and bump up the voltage to 2.2V...then it just worked....lost all my overclock settings tho so have to start from scratch again.... :P just 1 little thing that bugs me...im running the rams on 2.2V but they are only rated for 2.1v...0.1V too much...it that a biggy?? is it ealy to over volt rams? can I damage rams by overvolting?? cheers guys special thanks to Battleneter2 :D |
powerover (12121) | ||
| 887101 | 2010-05-22 02:56:00 | Most components have a slight allowance for over voltage. Not to say it wont hurt it in the long run, but if its the only way to get it working you may have to chance it. | wainuitech (129) | ||
| 887102 | 2010-05-22 03:33:00 | Most components have a slight allowance for over voltage. Not to say it wont hurt it in the long run, but if its the only way to get it working you may have to chance it. um...i will try to lower the voltage until I find the minimum stable working voltage.... cheers |
powerover (12121) | ||
| 887103 | 2010-05-22 03:56:00 | If you can't smell burning then I guess maybe ok | gary67 (56) | ||
| 887104 | 2010-05-22 06:49:00 | Hey guys I got it going....have to manually set the ram frequency to 800Mhz and bump up the voltage to 2.2V...then it just worked....lost all my overclock settings tho so have to start from scratch again.... :P just 1 little thing that bugs me...im running the rams on 2.2V but they are only rated for 2.1v...0.1V too much...it that a biggy?? is it ealy to over volt rams? can I damage rams by overvolting?? cheers guys special thanks to Battleneter2 :D hey nps 2.2V is fine and its common to need to do that when overclocking. |
Battleneter2 (9361) | ||
| 1 2 | |||||