| Forum Home | ||||
| PC World Chat | ||||
| Thread ID: 103764 | 2009-10-05 20:09:00 | 2 Meter Handheld Radio setup | Driftwood (5551) | PC World Chat |
| Post ID | Timestamp | Content | User | ||
| 817179 | 2009-10-05 20:09:00 | Anyone had any experience setting up a Quansheng TG-UV or could point me to a NZ forum that may be able to help. I'm trying to use 1 frequency in the 150MHz range but can't seem to trip the repeater. |
Driftwood (5551) | ||
| 817180 | 2009-10-05 20:18:00 | As I recall, one of the requirements to operate (close to) that frequency was a general understanding of the equipment and the general radio spectrum. ;) Maybe you should be trying 27 Mhz? |
R2x1 (4628) | ||
| 817181 | 2009-10-05 22:09:00 | Hello again, you seem to reply to all my strange questions. Ah, why should I use 27 Mhz for a 2 Meter repeater. |
Driftwood (5551) | ||
| 817182 | 2009-10-05 22:24:00 | Hi Driftwood,try www.nzart.org.nz/branches In the left column click on your area. |
BobM (1138) | ||
| 817183 | 2009-10-05 22:30:00 | And for the licence www.nzart.org.nz |
convair (13650) | ||
| 817184 | 2009-10-06 00:47:00 | Thanks for that guys, I have the relevant frequency, offset & PL Tone. It's getting the TG-UV to use it. I had a Kenwood TH-22A setup for this but it died. The TG-UV is the replacement. I only wanted a cheapy, it's only for back up. The local tech's are not very helpful if you havent bought the gear off them. |
Driftwood (5551) | ||
| 1 | |||||