| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 110695 | 2010-06-28 11:27:00 | EXPRESS CARD 34 | norrol (2154) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1114215 | 2010-06-28 11:27:00 | I have just purchased a new laptop and to enable me to down load video from my Sony camcorder I have purchased an Express card 34 with a firewire connection. On inserting the express card the laptop has loaded the correct drivers and it is reconised in the device manager as VIA 1394 OHCI Compliant Host Controller. When I connect the DV camcorder to the express card with the firewire cable the computer does not reconise the camcorder. I have a disc with the camcorder driver on it but it is not reconised by windows 7 and using Google I havnt been able to find a later driver. Can any ons suggest what I need to do to enable my laptop to reconise the camcorder when it is connected to the express card. Thanks norrol |
norrol (2154) | ||
| 1114216 | 2010-06-28 11:32:00 | Does the cam have a 3 way switch (like off/VCR/camera), or similar?? If it does switch it. Windows may then pick it up. I have to switch the cam here to camera before windows picks it up | Speedy Gonzales (78) | ||
| 1114217 | 2010-06-28 13:16:00 | Hi Speedy , Yes the camcorder is on but still not reconised by laptop |
norrol (2154) | ||
| 1114218 | 2010-06-28 14:10:00 | Hmm, and did you try moving the switch to the different options, if its got on/off/vcr/camera on the cam? I can check it out tomorrow using teamviewer, If you like. Just send me the ID and password (in teamviewer, once you install it) in a PM. So, I can log in. Look in device manager, when you move the switch around. Something SHOULD come up under imaging | Speedy Gonzales (78) | ||
| 1 | |||||