Forum Home
Press F1
 
Thread ID: 111865 2010-08-14 23:50:00 cpu fan starts but nothing else user123 (15924) Press F1
Post ID Timestamp Content User
1127806 2010-08-14 23:50:00 hi everyone, i cant seem to start my computer. the cpu fan spins but nothing else. i've only plugged in my psu onto my mobo. i was expecting some beeps but nothing happens. i've tried switching to a different psu. only the speakers and power sw are plugged into my mobo. It's a GA-7DXE mobo.:badpc::badpc:
i need to fix this problem very quickly.
thanks:thanks
user123 (15924)
1127807 2010-08-14 23:53:00 Did you plug the ATX 12v (4 pin) adapter in as well? You have to if the PSU and mobo have the connection Speedy Gonzales (78)
1127808 2010-08-14 23:55:00 the mobo doesnt have a 4-pin connection user123 (15924)
1127809 2010-08-15 00:07:00 Have you got on board graphics or a separate card? You would need to insert a graphic card if you don't have on board otherwise it won't boot.

There are no on board graphics apparently so have you put an AGP or PCI graphics card in? It won't boot unless you do.
Snorkbox (15764)
1127810 2010-08-15 00:08:00 i do have a seperate card, but i thought that if u didn't plug it in you would here a long beep-short beep-short beep? user123 (15924)
1127811 2010-08-15 00:15:00 When you say the speakers are plugged in is this the speaker in the case or speakers as plugged into audio out? Snorkbox (15764)
1127812 2010-08-15 00:17:00 When you say the speakers are plugged in is this the speaker in the case or speakers as plugged into audio out?
speaker in the case
user123 (15924)
1127813 2010-08-15 00:19:00 Chances are that your motherboard has failed, probably through bad capacitors, this is after all a 7 year old mobo, have a look for swelled or leaking caps (check your PSUs as well) feersumendjinn (64)
1127814 2010-08-15 00:22:00 I still think you had best plug in a graphic card as normally the PC will be looking for one of those before it can boot. Either PCI or AGP. You won't be able to check the BIOS until you do anyway. Snorkbox (15764)
1127815 2010-08-15 00:30:00 I still think you had best plug in a graphic card as normally the PC will be looking for one of those before it can boot. Either PCI or AGP. You won't be able to check the BIOS until you do anyway.
i just tried it, it doesnt work, it still says no signal.
user123 (15924)
1 2 3