Forum Home
Press F1
 
Thread ID: 112505 2010-09-08 23:41:00 SATA install NZHawk (4093) Press F1
Post ID Timestamp Content User
1135690 2010-09-09 00:21:00 I couldn't find any SATA mode in the bios NZHawk (4093)
1135691 2010-09-09 00:32:00 Is the drive showing in the BIOS? SoniKalien (792)
1135692 2010-09-09 00:36:00 Disable AHCI in the BIOS, then you wont need the SATA drivers. Does this PC support SATA 1 or 2?? If it supports 1, and the hdd is SATA 2, you'll have to jumper the hdd to SATA 1 / 150 Speedy Gonzales (78)
1135693 2010-09-09 00:43:00 I couldn't find any SATA mode in the bios
Is the sata controller built-in on the mainboard?, if so the cd will have the drivers.
SolMiester (139)
1135694 2010-09-09 00:46:00 There isn't any AHCI options in the BIOS
No the drive isn't recognized in the BIOS
I don't have the mainboard cd
NZHawk (4093)
1135695 2010-09-09 00:51:00 So is SATA on the mobo or on a PCI card. If its on a card then the option wont be in the BIOS Speedy Gonzales (78)
1135696 2010-09-09 00:53:00 SATA is on the motherboard NZHawk (4093)
1135697 2010-09-09 00:56:00 Must be there somewhere then. Go through all the menus Speedy Gonzales (78)
1135698 2010-09-09 01:01:00 I have pressed the F6 but don't have the "sata controller" Could someone direct me to where I can download one.

Is this a fresh install, whats on the pc at present?
SolMiester (139)
1135699 2010-09-09 01:04:00 Yes this is a fresh install.
has a cdrw drive - ide
floppy drive
AMD Sempron 3000
I think 512Mb ram
NZHawk (4093)
1 2 3 4