| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 112748 | 2010-09-21 02:52:00 | New System nuild ram issue | McFly (7659) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1138656 | 2010-09-21 02:52:00 | Hi there, Have just built my new gaming PC, 3rd pc I've ever built. I have 6GB ram installed, the problem is that the Bios states there is 4GB usable, and Windows7 64bit reports 4GB ram. I ran CPU-Z and it correctly reports 6GB. How do I get the Bios and Windows to regognize the entire 6GB as usable ram? Thanks in advance for any help/advice you can provide. My Sys specs are as below: CPU : Intel i7 930, with stock cooler Mobo : Asus P6X58D-E Ram : 3x2GB Corsair XMS3 GPU : Gigabyte GTX480 HDD : WD Caviar Black 2TB OS : Windows 7 Ultimate 64bit Case : Antec 902 PSU : CoolerMaste Silent Pro 850W Regards, Craig:waughh: |
McFly (7659) | ||
| 1138657 | 2010-09-21 03:17:00 | I am guessing you have a duff or unseated stick hence detected as installed but not usable, seen it before. Re-seat and if still no good, test one or two sticks at a time to isloate the culprit. |
Battleneter2 (9361) | ||
| 1138658 | 2010-09-21 03:18:00 | Are you on the latest BIOS? support.asus.com |
SolMiester (139) | ||
| 1138659 | 2010-09-21 03:48:00 | The board Has 6 slots, 3 Black and 3 Blue. (3 sets of Two) What slots are the RAM Modules in ? Make sure they are in slots A1, B1 & C1 As per the Manual (www.imagef1.net.nz) (blue slots) |
wainuitech (129) | ||
| 1 | |||||