Forum Home
Press F1
Thread ID: 113373	2010-10-17 00:07:00	Unable to connect to internet via Dynalink Router	EX-WESTY (221)	Press F1

Post ID	Timestamp	Content	User
1145500	2010-10-17 00:07:00	I've been staying at a place with a lan cable in my room however I can't get on the net. On my lan at home it's fine, at work it's fine however @ this place all I get is local connection only. I've checked all the settings in the laptop and they are fine and it comes up with an exclaimation mark on the network connection icon as soon as I'm connected to this network. It also states local only. The owner brought his laptop over to my room and surfed the net straight away no problem. Also the router was turned off and rebooted and my lan cable was changed to a different port still no difference. The only traffic going out is from my end, no bits recieved from the router either. I disabled my firewall and cleared all the cache but it's still no go. I'm thinking the router has to be firewalling me for some reason, the owner says they've never had a problem before but for some reason it doesn't seem to like my laptop. ( Acer running Vista )	EX-WESTY (221)
1145501	2010-10-17 00:12:00	Right mouse on the icon on the taskbar / diagnose and repair. Whats it say?	Speedy Gonzales (78)
1145502	2010-10-17 00:16:00	Unable to repair Tried that several times IPV4 connected IPV6 local if i recall correctly If I browse the network I can see the router Dunno what the IP address is though and the owner doesn't know the password although I'm guessing it will be default.	EX-WESTY (221)
1145503	2010-10-17 03:19:00	IP Addy looks like: default IP address to access the router's setup is 192.168.0.1 or 192.168.1.1	kjaada (253)
1145504	2010-10-17 08:38:00	Try disabling you AV just to check( safe site only). What os are you running?	PPp (9511)
1145505	2010-10-17 11:15:00	Try disabling you AV just to check( safe site only). What os are you running? Try re-reading post #1 again. You may get a clue !! :devil	DUNK (1527)
1145506	2010-10-17 17:47:00	What firewall or Internet security do you have installed. Right click on your Lan connection and select Properties Untick IPv6 Select IPv4 and go to properties Is it set to obtain an IP address automatically, if not set it to that. If it is on auto try manually setting it to 192.168.1.2 If that works you may have to change it back when you want to connect to home or work.	Safari (3993)
1145507	2010-10-17 18:11:00	Also check this MS info Windows Vista cannot obtain an IP address from certain routers support.microsoft.com	Safari (3993)
1