| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 114765 | 2010-12-16 02:48:00 | Speedy please. HJT log for checking. | bluenose (14548) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1162429 | 2010-12-17 07:03:00 | I think the problem is fixed. Fingers crossed. Yesterday was very hot here and the PC was under the desk with side panel OFF. Therefore the fans were only circulating warm air and the longer they ran the warmer the air became. Today I have been running the PC all day with the side panel in place. The day has also been cooler. No problems so far. Time will tell. In regard to clean install. 2K Pro is installed and I have a sealed XP Pro upgrade. My understanding is that for the upgrade to install correctly it has to be installed over an existing OS. I have another HD of the same capacity as the one in question and also a 1TB WD desktop drive and power supply. I have a lot of data to be retained. How would you suggest I go about doing it? |
bluenose (14548) | ||
| 1162430 | 2010-12-17 07:13:00 | Only thing with upgrades, it can make things worse. You could try installing XP on one of the other hdd's then connect the 2k hdd as a slave if its IDE. Or connect it to a SATA connection if its SATA. Then get what you want off it. I think you can do a clean install with an upgrade. It may ask for proof of a previous OS | Speedy Gonzales (78) | ||
| 1162431 | 2010-12-17 08:28:00 | The two original drives are SATA and I do have the 2K Pro Disks and packaging as well as the aforementioned XP Pro upgrade. I will have to do a lot of reading over the next few days. Many thanks for your help Speedy. |
bluenose (14548) | ||
| 1162432 | 2010-12-17 08:58:00 | Sweet no probs | Speedy Gonzales (78) | ||
| 1 2 | |||||