| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 114776 | 2010-12-16 09:49:00 | Intel D945GCCR MB | bk T (215) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1162603 | 2010-12-16 09:49:00 | This MB works fine other than no POST screen display when booting up. It goes screen doesn't show anything at all when the ON button is pressed; it pauses for about 3 seconds and then goes to the Windows start up screen. Checked the BIOS setup, couldn't find anything relates to this issue. Is this the default Intel MB? |
bk T (215) | ||
| 1162604 | 2010-12-16 09:52:00 | Try pressing the Esc key after you reboot. See if it shows something | Speedy Gonzales (78) | ||
| 1162605 | 2010-12-16 09:59:00 | No, doesn't work. | bk T (215) | ||
| 1162606 | 2010-12-16 10:01:00 | Probably something that the Intel mobos dont show. Just as long as it boots into windows, I wouldnt worry about it | Speedy Gonzales (78) | ||
| 1162607 | 2010-12-16 10:31:00 | I have an Intel board, which does the same thing. Reason is that it doesn't give the monitor time to turn on before it's done with POST and starts OS boot. Try pressing the Pause\Break button after swich on, then you might see something. If not, press enter and then pause again. do this a couple of times and you might get something on the screen. |
Agent_24 (57) | ||
| 1 | |||||