Forum Home
Press F1
Thread ID: 116014	2011-02-13 21:16:00	Win 7 + Projector	JohnMax (12135)	Press F1

Post ID	Timestamp	Content	User
1177880	2011-02-13 21:16:00	Control Panel "Connect to Projector" works fine but is very tedious when I unplug and replug different projectors (or even the sameone). Has anyone found how to set Win7 so it autoconnects ? Also if I leave the projector connected while I restart the laptop, then the display doesn't work. any ideas	JohnMax (12135)
1177881	2011-02-13 21:21:00	Is it a laptop? One of the function keys should cycle through the display output settings (f8?)	Hopper (14491)
1177882	2011-02-13 21:38:00	Toshiba Laptop. Yes F5 is supposed to cycle through the options. But under XP it didn't matter how often I unplugged/ plugged in it was immediately available. That's what I want back. Plus for some of our staff who are using Macs with Win7 and are users and want things simple....	JohnMax (12135)
1177883	2011-02-13 21:46:00	windows key + p should do it. Also, if it's a laptop it's normally function key + f key. (like mine is FN+F4, not just f4 alone)	8ftmetalhaed (14526)
1177884	2011-02-13 21:52:00	Fn F5 is supposed to - just updating Toshiba drivers to see if that is the issue. Laptop - Windows key? this is a Satellite A100. The point is that I shouldn't have to change anything - plug and play operation required.	JohnMax (12135)
1177885	2011-02-13 21:57:00	Laptop - Windows key? this is a Satellite A100. Upper right corner based on photos I've Googled :p The point is that I shouldn't have to change anything - plug and play operation required. VGA isn't Plug and Play anyway :stare:	pcuser42 (130)
1177886	2011-02-13 23:35:00	Oh yes the Windows key is there - don't use that much. To Reiterate. Under XP I could plug/unplug as often as and the projector "plug and play" functioned. No messing around clicking anything. I want to do this under Win 7 but it keeps needing to "connect to projector" P.I.T.B.	JohnMax (12135)
1