Forum Home
Press F1
 
Thread ID: 116242 2011-02-22 22:18:00 stop code - BSOD NZHawk (4093) Press F1
Post ID Timestamp Content User
1180802 2011-02-23 04:00:00 The caps don't look very healthy do they! Snorkbox (15764)
1180803 2011-02-23 04:33:00 Currently got a customers PC, with the exact same Error and BSOD code, even in safe mode - first ran a memory test- all OK, then opened the case Spot the problem (www.imagef1.net.nz) :(

Out of interest, what brand are they?
Agent_24 (57)
1180804 2011-02-23 05:07:00 Out of interest, what brand are they? The ones that are leaking, or showing signs of bulging are Labeled as Nichicon.

The others that "look" OK are Rubycon & Teapo.

Kind of thought something more than a corrupted OS when the customers said on starting it sounds like R2D2 from star wars speaking -- and it did:eek: Not the normal beep codes.

Removed the graphic card, cleaned all the crap off, and put it back and it stopped beeping (it was under a desk and rather dark) so didn't see the caps at first.
wainuitech (129)
1180805 2011-02-23 06:23:00 The ones that are leaking, or showing signs of bulging are Labeled as Nichicon.

HM series I suppose?
Agent_24 (57)
1180806 2011-02-23 06:32:00 From What I can see- HD No letter M anywhere on them. wainuitech (129)
1180807 2011-02-23 09:02:00 Sure takes a while for these sods to work their way out of the system. This is a very good example, though, I must say!! linw (53)
1180808 2011-02-23 09:48:00 From What I can see- HD No letter M anywhere on them.

Strange... HM and HN from around 2005 were the dodgy lot, perhaps the PSU ones died a long time ago and have been destroying the others ever since.
Agent_24 (57)
1180809 2011-02-23 20:44:00 Currently got a customers PC, with the exact same Error and BSOD code, even in safe mode - first ran a memory test- all OK, then opened the case Spot the problem (www.imagef1.net.nz) :(


Wow - that motherboard has had it.

Getting back to the original posting:

Have inspected mine & no such problem - not to say they aren't faulty but just not showing it.

Is there any diagnostics for capacitors?
NZHawk (4093)
1180810 2011-02-23 20:55:00 Look at them, if theyre stuffed replace them Speedy Gonzales (78)
1180811 2011-02-23 20:58:00 No visual problems on capacitors NZHawk (4093)
1 2 3