| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 118508 | 2011-06-08 00:18:00 | Help please. Persistant BSoD's and ht sync flood errors. | LiquidSnowIsH2O (16412) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1207748 | 2011-06-13 23:40:00 | My PSU is worthless? | LiquidSnowIsH2O (16412) | ||
| 1207749 | 2011-06-13 23:53:00 | Not worthless, just underpowered. | wratterus (105) | ||
| 1207750 | 2011-06-14 00:47:00 | I say worthless cause from now on I'm getting modular power supplies, half the power cables aren't being used at all. You should've seen the cable management before I put in the PSU and after. :/ | LiquidSnowIsH2O (16412) | ||
| 1207751 | 2011-06-14 01:08:00 | Yep, that's pretty normal. :D Did you have a look at the PSUs I posted earlier? They are both very good. |
wratterus (105) | ||
| 1207752 | 2011-06-15 18:22:00 | I'm not gonna get any new PSU's now... But for the next time I upgrade my system I will probably have to upgrade my power supply too and that time I will for sure get something modular. | LiquidSnowIsH2O (16412) | ||
| 1207753 | 2011-06-21 13:26:00 | I pushed my RAM to 1600 yesterday and so far it seems to be running ok, except for one instance where I came back to find my computer screen asleep and no attempt I made to wake it prevailed. Either the computer was hibernating and I failing in my attempts awaken it, or an issue with my GPU resulted in a loss of video input which is a lot more plausible considering that after I rebooted from the emergency shutdown everything was tinted a little red (what was white appeared pink) and the resolution wasn't what it was supposed to be. BTW: ZoneAlarm is gone now; replaced by Comodo firewall & Defense+. |
LiquidSnowIsH2O (16412) | ||
| 1207754 | 2011-06-21 13:51:00 | And then I got a BSoD so back to defaults it is. For the record all I changed in the bios was the FSB/DRAM ratio from 1:3.33 to 1:4 and I also disabled spread spectrum. | LiquidSnowIsH2O (16412) | ||
| 1207755 | 2011-06-21 22:21:00 | And then I got a BSoD so back to defaults it is. For the record all I changed in the bios was the FSB/DRAM ratio from 1:3.33 to 1:4 and I also disabled spread spectrum. You need to do some reading on Phenom clocking....HTT Sync errors are common, if you dont know what you are doing... Overclockers Phenom Guide (www.overclockers.com) |
SolMiester (139) | ||
| 1207756 | 2011-06-22 16:09:00 | Was a BSoD not a HTT. HTT's went away after I reinstalled. | LiquidSnowIsH2O (16412) | ||
| 1207757 | 2011-06-22 16:22:00 | Okay I found the problem, My Phenom II X4 840 can't run DDR3-1600, any attempt I make to run my RAM at this speed with my current CPU will result in a BSoD, plus I'm not quite sure my mobo supports it either. | LiquidSnowIsH2O (16412) | ||
| 1 2 3 4 | |||||