| Forum Home | ||||
| PC World Chat | ||||
| Thread ID: 117514 | 2011-04-22 05:38:00 | Tyre pressure question | Renmoo (66) | PC World Chat |
| Post ID | Timestamp | Content | User | ||
| 1196400 | 2011-04-22 05:38:00 | What does the following mean in psi? Tyre pressures : 165/70 R 13 T (sourced from carinfo.autold.com) |
Renmoo (66) | ||
| 1196401 | 2011-04-22 05:44:00 | It doesn't refer to pressure, it is a misprint. That is a tyre size. | Terry Porritt (14) | ||
| 1196402 | 2011-04-22 05:47:00 | What does the following mean in psi? Tyre pressures : 165/70 R 13 T (sourced from carinfo.autold.com) That is the tyre size and rating. Between 28 -30 psi is ok for the starlet You will find the pressure on the drivers door pillar 2.0kg/cm2 = 29 psi |
Safari (3993) | ||
| 1196403 | 2011-04-22 05:51:00 | You will find the pressure on the drivers door pillar *2, have to keep telling wifey to look there for it tooo. Lurking. |
Lurking (218) | ||
| 1196404 | 2011-04-22 06:05:00 | That is the tyre size and rating. Between 28 -30 psi is ok for the starlet You will find the pressure on the drivers door pillar 2.0kg/cm2 = 29 psi Oh right. So 29 psi would be okay for my starlet? |
Renmoo (66) | ||
| 1196405 | 2011-04-22 06:19:00 | probably ok but what is best depends a lot on the tires themselves. also that pressure may be fine for the front but the rear may need less. a bit of experimenting is in order. change the pressure, go for a drive and see what effect it has. some tires a little pressure change can make a big difference, some tires go nearly flat before there is a change. | tweak'e (69) | ||
| 1196406 | 2011-04-22 06:32:00 | I wouldn't stress it, The gauge at the servo is almost guaranteed to be incorrect, in most cases incorrect to the point of being worthless. And even if it is correct, you have no way of knowing so don't trust it. On that note, whack in 30, Crank up the sounds and go cruising for the ladies. What the hell is a starlet anyway? |
Metla (12) | ||
| 1196407 | 2011-04-22 06:52:00 | I wouldn't stress it, The gauge at the servo is almost guaranteed to be incorrect, in most cases incorrect to the point of being worthless. And even if it is correct, you have no way of knowing so don't trust it. On that note, whack in 30, Crank up the sounds and go cruising for the ladies. What the hell is a starlet anyway? It's called a car, made by a company called Toyota which make cars. :rolleyes: Here's a link if you would like to find out more: en.wikipedia.org |
bot (15449) | ||
| 1196408 | 2011-04-22 08:31:00 | Zoom. And over your head it goes. :pf1mobmini: |
Metla (12) | ||
| 1196409 | 2011-04-22 08:36:00 | Zoom. And over your head it goes. :pf1mobmini: Tisk tisk --:lol: Maybe this Random German Starlet (www.google.co.nz 6sa%3DG%26tbm%3Disch&ei=izCxTYinN8zciAK_r42wBg) is more to Metlas liking ;) |
wainuitech (129) | ||
| 1 2 3 | |||||