| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 121919 | 2011-11-21 08:48:00 | Cisco 857 ADSL Config | WarNox (8772) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1244664 | 2011-11-21 08:48:00 | Hey, I want to configure a Cisco 857 for ADSL. Below is a working config but I've got no idea which parts are required. Comparing it to the below link from Cisco most commands do not match up. If someone could let me know which parts are required that would be great. I don't want to install something that works if I've got no idea why :) Too bad CCNA doesn't teach you this stuff. Cisco's way: www.cisco.com Working config: ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Vlan1 ip address 10.0.0.254 255.255.255.0 ip access-group 102 in ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 ! interface Dialer0 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip inspect firewall out ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username xxxxx password 7 xxxxx ppp ipcp dns request ppp ipcp route default ! ip forward-protocol nd ! ... ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface Dialer0 overload ip nat inside source static 10.0.0.1 interface Dialer0 ! Thanks for any help. |
WarNox (8772) | ||
| 1244665 | 2011-11-22 06:14:00 | Would help if we knew exactly what you were trying to achieve! | stormdragon (6013) | ||
| 1244666 | 2011-11-22 08:49:00 | Hmm yea, I did not word that right at all. Lets start again. If I wanted to learn to configure one of these things for ADSL in NZ, where would I start? |
WarNox (8772) | ||
| 1 | |||||