Forum Home
Press F1
 
Thread ID: 123256 2012-02-13 23:32:00 PC to Monitor Connection Ideas Caleb Watson (16566) Press F1
Post ID Timestamp Content User
1259037 2012-02-13 23:32:00 Hello,

In December I purchased a new PC.

My graphics card supplies me with 2x DVI outputs; whereas my 2x 1080p HD screens have HDMI and VGA inputs.

At the moment I am using one DVI to VGA adapter which then connects to a VGA to VGA cable and for the other screen I am using a DVI to HDMI cable.

The DVI to HDMI cord I am using will need to be returned to its rightful owner soon and so I'm going to need a new cable.

My questions are:
Which cabling method should I use for best quality?
When buying cords does gold/silver plating ect matter?
Any recommendatoins on brands, suppliers ect?

Thanks for the help,
Caleb Watson
Caleb Watson (16566)
1259038 2012-02-13 23:44:00 I assume you meant DVI to VGA adapter or the first bit makes no sense.
A DVI to HDMI either direct cable or using an adapter at the PC end would do the trick, and be better in theory than vga.

Stay under 3 metres in length and any old Cable will work perfectly, the gold etc is mainly marketing BS especially with short cables.
I use cheap cables from the likes of Jaycars or PBtech . You can find them even cheaper online.
dugimodo (138)
1259039 2012-02-13 23:47:00 I assume you meant DVI to VGA adapter or the first bit makes no sense.
A DVI to HDMI either direct cable or using an adapter at the PC end would do the trick, and be better in theory than vga.

Stay under 3 metres in length and any old Cable will work perfectly, the gold etc is mainly marketing BS especially with short cables.
I use cheap cables from the likes of Jaycars or PBtech . You can find them even cheaper online.

Thanks for pointing out my fail there.

OK, great. Thanks. I'll go and buy two DVI to HDMI cables on payday.

I thought that gold plating stuff was pointless. Thanks again!
Caleb Watson (16566)
1