Forum Home
Press F1
Thread ID: 3179	1999-12-12 05:44:00	CD-ROM	Guest (0)	Press F1

Post ID	Timestamp	Content	User
3598	1999-12-12 05:44:00	pressF1@pcworld.co.nz wrote: > SUBJECT: Re: CD-ROM Problem > POSTED BY: C Nelson > > www.idg.co.nz > > ************************************************** ************************* > Brought to you by IDG Communications > The world's largest publishers of IT information > Ph: 64-9-377 9902 Fax: 64-9-377 4604 Web: http://www.idg.co.nz > ************************************************** ************************* > > Press F1 is sponsored by Compaq - Better Answers Thanks for your quick reply, Without me making any changes, here are the two files you refered to: CONFIG.SYS FILE: DEVICE=C:\WINDOWS\HIMEM.SYS DOS=HIGH,UMB DEVICE=C:\WINDOWS\EMM386.EXE NOEMS REM DEVICEHIGH=C:\DRIVER\SBIDE.SYS /D:MSCD001 /P:170,15 /V AUTOEXEC.BAT FILE: C:\PROGRA~1\MCAFEE\VIRUSS~1\SCANPM.EXE C:\ @IF ERRORLEVEL 1 PAUSE @ECHO OFF REM (BY-NETMOUSE-INSTALL) AMOUSE LH MSCDEX.EXE /D:MSCD001 /L:E /M:8 /V SET BLASTER=A220 I5 D1 T4 set path=C:\BITWARE\;C:\GNET95\DOS The CD drive letter was changed to E: when I had my computer upgraded early last year, why PB Technologies did this, I have no idea. Before I try your suggestions, I wonder if you could have a look at above files because I cannot understand the line in the autoexec.bat file that says: LH MSCDEX.EXE /D:MSCD001 /L:E /M:8 /V. Looking forward to your reply, Bob	Guest (0)
1