| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 8056 | 2001-03-02 09:03:00 | 3D card problems / Wi | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 9448 | 2001-03-02 09:03:00 | I have an old PII 333MMX, with an old Intel LX440 chipset Micro Star 6117 motherboard, 64SDRAM and it has an AGP slot. I changed the old 2D matrox card for a NVidia TNT2 M64 3d card, but the card only displays 16bit colour, (I am using the correct drivers for the card). Also I have also updated the drivers and Bios but to no avail, can anyone help? |
Guest (0) | ||
| 9449 | 2001-03-02 11:16:00 | Before you changed cards did you tell windows to change video card drivers to a standard VGA or PCI adapter?....if not your old drivers could be messing with the new ones . Change your adapter to the standard windows driver and reboot then try installing your detonators |
Guest (0) | ||
| 9450 | 2001-03-05 03:55:00 | Hi, wow, I didn't think I'd see that setup again, my old motherboard was one of those. My TNT2 went sweet-as on this rig, I did however apply a bios update to my board a few weeks beforehand, so I'd suggest you do it too (available on the microstar .tw site). Did you uninstall any matrox utils in addition to any drivers before installing? Try the nvida detonator drivers for best performance.(www.geforce.com) |
Guest (0) | ||
| 1 | |||||