Forum Home
Press F1
Thread ID: 8923	2001-04-26 09:39:00	Genius_GM56flexE-V Modem	Guest (0)	Press F1

Post ID	Timestamp	Content	User
11824	2001-04-26 09:39:00	Configures with a Celeron 500 but will not detect with an AMD133 or a 486DX66. Device Manger states Com2 has no conflects and working on IRQ3. Have reloaded drivers several times, each time states drivers loaded correctly. Also tried manufactures updated drivers from their site.	Guest (0)
11825	2001-04-26 10:03:00	Hi there John, I wonder if the Celeron 500 has the com port turned off in the bios. Sometimes the modem is configured with the com port set on the modem card. Have either of the other machines got the port turned off in the bios? I had to disable com 2 on my computer, so that the modem picked up the available port. Just a thought, but worth a try. Regards Fred	Guest (0)
11826	2001-04-27 06:20:00	It could be a software modem which uses your cpu's processing power. Those modems typically need a Pentium II 233 or over, if u install them on slower computer you computer will be very unstable or the modem may not respond at all. Thats why I think it can work fine on a Celeron 500	Guest (0)
1