| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 10652 | 2001-08-05 10:41:00 | Compucon Monitor Driver | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 16506 | 2001-08-05 10:41:00 | I have just reinstalled the software on my PC and am having display problems on my Compucon SRC1502L Monitor. I have a Winfast S280V2 video card which has the correct driver installed. My problem is that I can not get the display adjusted horizontally to fill the screen. The monitor controls for horizontal size are set to max..all other factors are OK. I have tried changing resolutions etc with no avail. Can anyone kindly advise me what could be set incorrectly? | Guest (0) | ||
| 16507 | 2001-08-05 11:30:00 | Sometimes adjusting the refresh rate can help, have a look in display/settings/advanced properties and set it to optimal if its not or try some other options listed there, otherwise you could get hold of a display utility that will allow to adjust the screen settings to a greater degree such as display doctor, but there are probably better ones now. |
Guest (0) | ||
| 16508 | 2001-08-07 02:04:00 | Hiya, Try changing the refresh settings (Start button-> Settings-> Control Panel-> Display-> Settings tab). First try the Adapter default setting, then work you're way up. An ideal setting would be 72-75Hz. If you think you are still having problems give us a bell at - (09) 415-3303 or email- stuart@compucon.co.nz I'm sure something can be worked out. Regards, Stuart Todd Technical Services Compucon Computers NZ Email: stuart@compucon.co.nz The views expressed in this document do not necessarily reflect those of Compucon Computers NZ Ltd |
Guest (0) | ||
| 1 | |||||