Forum Home
Press F1
Thread ID: 11574	2001-09-26 03:28:00	adsl install problem	Guest (0)	Press F1

Post ID	Timestamp	Content	User
19443	2001-09-26 03:28:00	Recently had adsl installed, no problem. Installed ni 200,no problem. Cant use jetstart however as everytime I try to connect I recieve error 650:The sever you are dialing into does not respond to a network request. The line is fine and so is the modem, so I guess it has something to do with the network settings??	Guest (0)
19444	2001-09-26 23:18:00	hi Andrew, I suggest you check out the NZ ADSL mailing list. You can subscribe and search the archives here: unixathome.org	Guest (0)
19445	2001-09-29 08:38:00	Andrew. This might be a silly question, but if you haven't resolved your access problem yet, have you formatted your logon correctly? You will already have an Xtra logon & password but I had a similar problem and got the error 650 message after install when I wasn't using a Telecom modem. After much messing about and no help from Xtra I found that the logon had to have an an extra component added over and above the original that I set up when I opened the Xtra account. The format is: [yourlogon].xadsl@xtra.co.nz If this is not the way you are set up it might be the answer. I assume that you installed the Ni200 using the CD which automatically sets the VPI and VCI settings (0 & 100) and the communication protocol (PPP over ATM). If any of these are wrong you won't connect either. I use an Ni500 and initially didn't realise that the CD would do all the setup except logon & password automatically and very nearly went down the manual setup road. Under manual setup it is real easy to miss a vital setting. Regards John	Guest (0)
1