| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 11798 | 2001-10-06 06:08:00 | more suggestions required... | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 20274 | 2001-10-06 06:08:00 | hi i have a microstar MS-5124 motherboard with a intel pentium 75Mhz model SZ994 cpu chip. at the moment i've overclocked it to 100? but i'm wondering if it's possible to go any further 150? 133? 150? I want to overclock without buying things such as larger heat sinks and other things. but most importantly, i would like it to be stable. hopefully, it'll be ok going the maximum the motherboard supports (which is 166). if not then what can i go up to? | Guest (0) | ||
| 20275 | 2001-10-06 06:27:00 | I'm suprized it's stable at 100mhz | Guest (0) | ||
| 20276 | 2001-10-06 06:30:00 | Why don't you crank it up to 166mhz and let us all know how it goes. I'd sure be interested |
Guest (0) | ||
| 20277 | 2001-10-06 06:36:00 | Ahh me again--== perhaps you had better hold your hair dryer onit; set on cold of corse | Guest (0) | ||
| 20278 | 2001-10-06 06:37:00 | i don't mean to be rude but why not just try it?? try it at the next setting, see if it runs stable, check how hot it is when playing a game. if it goes unstable or starts getting to hot drop it back a step. | Guest (0) | ||
| 20279 | 2001-10-06 06:40:00 | TO go any higher you will need heat sinks etc, and even then it may not work. You've gained 33%, quit while you ahead. Although, you may want to check how how its running at 100 with a standard heat sink. |
Guest (0) | ||
| 20280 | 2001-10-06 07:00:00 | How much ram have you got in that machine, wouldn't that be a safer way to go. What exactly do you want to use this computer for? |
Guest (0) | ||
| 20281 | 2001-10-06 07:01:00 | i found you can flash your bios and make that machine have a 200 | Guest (0) | ||
| 20282 | 2001-10-06 07:12:00 | Or, be like me and set your processor on fire. (my ol' 75mhz) | Guest (0) | ||
| 20283 | 2001-10-06 07:31:00 | me again again i no what/you could put the computor in the fridge and drill a hole in the side of the frige for the kable then when you change a disk u can get a cold bear at the same time/that wont cost any $bucks |
Guest (0) | ||
| 1 | |||||