| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 11949 | 2001-10-10 05:42:00 | PC133 RAM | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 20898 | 2001-10-10 05:42:00 | I'm using a Celeron 450 system with a 100MHz bus, and I'm looking at upgrading the RAM. The thing is I've noticed that PC100 is quite rare and expensive compared to PC133. Is it possible to use RAM for a higher bus (PC133) speed in my system (PC100), and will this have any effect on performance? | Guest (0) | ||
| 20899 | 2001-10-10 05:55:00 | Hi Tony The 133 RAM will mix fine with your existing RAM and system, the only thing is the system will still run at 100, but you will notice a boost due to the extra RAM. GG |
Guest (0) | ||
| 20900 | 2001-10-10 09:09:00 | PC133 RAM will work fine in your system - it'll clock down to PC100. I've got pc133 running at pc66 (should have read the fineprint before I bought my m/board!) | Guest (0) | ||
| 1 | |||||