| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 148469 | 2020-01-16 03:21:00 | LGA1150 broken pin for data bus? | Vicx (11114) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 1466029 | 2020-01-16 03:21:00 | I accidentally broke one pin on my LGA 1150 motherboard. I checked the manual and found it's SA_DQ38 which is one of the data bus pins. SA_DQ[63:0] Data Bus: Channel A data signal interface to the SDRAM data bus. I/O DDR3/DDR3L 10157 Anyone know if it's still safe to run? I don't want to damage my CPU in the process. |
Vicx (11114) | ||
| 1466030 | 2020-01-16 20:12:00 | Give it a go, it will work, or it won't, it won't blow anything up | piroska (17583) | ||
| 1466031 | 2020-01-20 07:54:00 | I'm guessing it won't work if you have any RAM installed in a channel A slot. You will probably have to use other RAM channel(s) if you want the board to do anything other than beep at you with a RAM error code. | Agent_24 (57) | ||
| 1 | |||||