| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 12977 | 2001-11-17 11:03:00 | primary ide | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 24767 | 2001-11-17 11:03:00 | hi, the primary ide on my pc cant detect any drives - connected hd to 2nd ide & worked. what next - get a new motherboard? any help much appreciated, susan | Guest (0) | ||
| 24768 | 2001-11-17 11:21:00 | what motherboard?? there was a small problem with some of the early intel boards. |
Guest (0) | ||
| 24769 | 2001-11-17 18:59:00 | Make sure the jumper on the drive is set to master not slave. | Guest (0) | ||
| 24770 | 2001-11-18 01:50:00 | Hi, Try checking that the pins in the ide connector are all straight, and not loose. You could also check in bios to see that both are enabled, or try restoring bios defaults, that fixes a lot of things. Otherwise perhaps try using the cable from the secondary channel on the primary, to eliminate that source of the problem. Hope that helps... |
Guest (0) | ||
| 1 | |||||