| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 13111 | 2001-11-23 02:47:00 | jetstart cables | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 25260 | 2001-11-23 02:47:00 | Hi, we have a nokia m112,for jetstart. cables have been installed by a telecom guy, however - it works upstairs, but not downstairs. swapped pcs around - no different. telecom guy claims cables ok, wont do anymore. any suggestions. what sort of cable is required- i'll get a short one & connect. should the nokia be connected to a hub to allow more than one pc? using win me. checked settings - all ok. again- had swapped pcs, but when connected downstairs - no go. many thanks |
Guest (0) | ||
| 25261 | 2001-11-23 04:09:00 | Hi,can you give us a little bit more information.What cables aer you refering to,the ones from the back of the M1122,or Telecom phone cables.If it is the former,check that the ETH light is on on the M1122 for that port.If not,either the cable is the wrong sort,(not a straight through cable),or the problem may be the network card in that PC.If it is the Telecom phone wiring,unless the technician has wired that jack to work for the ADSL,it probably won't work.Let us know how you get on Peter |
Guest (0) | ||
| 25262 | 2001-11-23 05:14:00 | thanks for your reply, the eth port lights do come on. what baffles me is why does it work upstairs & not downstairs - the cables thru out must be the same, so i dont think the network card is faulty (also swapped them around). 2 pcs connected to the nokia. unless the downstairs wall connection is faulty. tried another pc on win98, still no go. thanks |
Guest (0) | ||
| 1 | |||||