| Forum Home | ||||
| Press F1 | ||||
| Thread ID: 14298 | 2002-01-04 05:24:00 | Parallell Port Interface 'broken' | Guest (0) | Press F1 |
| Post ID | Timestamp | Content | User | ||
| 29755 | 2002-01-04 05:24:00 | 'Control Panel' tells me there is a problem in the SCSI Controllers' - the Iomega Parallel Port interface is not working properly. Trying to upgrade drivers produces no response from Windows site. Anyone got any ideas? | Guest (0) | ||
| 29756 | 2002-01-04 11:20:00 | I had the same problem yesterday and I reloaded the drivers from Windows and it fixed the problem. Didn't even need the CD. Maybe deleting it from Devices and letting Windows redetect or installing them manually after a reboot might do the trick. It's only a guess so it would be advisable to wait for some more responses. BC |
Guest (0) | ||
| 29757 | 2002-01-05 02:17:00 | Has i worked before, or is the Iomega something new? If it is new, the port may be set (in the BIOS) to the wrong mode. Check the Iomega manual for the mode it requires, aand compare the BIOS setting. |
Guest (0) | ||
| 29758 | 2002-01-05 04:02:00 | Have a look at www.iomega.com/support/documents/30019.html re checking whether you have a parallel port drive or a SCSI drive. Suggest fossicking around this site for further help. Frank. |
Guest (0) | ||
| 1 | |||||