Forum Home
Press F1
Thread ID: 14556	2002-01-12 03:28:00	Installing Red Hat 7.2 on RAID Controllers	Guest (0)	Press F1

Post ID	Timestamp	Content	User
30868	2002-01-12 03:28:00	My mobo has RAID controllers which I am using as IDE 3 and 4 with 2x 40GB hard drives. IDE 1 and 2 have my CD ROM drives on it. On my hard drive I have an unpartition/unformatted 20GB that I would like to use for RH but am unsure if it would be recognised in the installation due to them being on RAID. The RAID controllers are Highpoint 370. I have seen that they have linux drivers for these controllers and I think they are included in RH 7.2.	Guest (0)
30869	2002-01-12 03:47:00	Since RAID either are, or emulate,SCSI devices, you should be OK. Basically you should have the BIOS set up as 'No Hard Disks Installed', as for systems which boot from SCSI drives. HAve a go. It's not Windows -- at worst it will tell you 'You can't do that there 'ere'.	Guest (0)
1